224 Description

The rack-mountable one-rack unit (1RU) Tellabs FlexSym Optical Network Terminal 224 (ONT224) offers the delivery of 24 ports of Power over Ethernet enabled Ethernet connectivity over an ITU-T G.9807 compliant symmetrical XGS-PON. This provides for 10 Gbps downstream, and 10 Gbps upstream, XGS-PON transmission. It offers an economical one-to-one closet-based switch replacement that reuses the last 100m CATx cables in the horizontal walls and drops while bringing all the security and management capabilities of PON.

Benefits

• TAA Compliant
• 10-Gigabit Symmetrical Passive Optical Network (ITU G.9807.1 XGS-PON)
• Economical one-to-one closet-based legacy switch replacement
• Reuse the last 100m CATx cables in the horizontal walls and drops
• Achieve lower IT support and maintenance costs
• Remove points of known network vulnerabilities
• Reduce fiber cabling building-to-building and floor-to-floor
• Gain extended temperature range inside IT equipment rooms
• Support IoT, smart buildings, Wi-Fi, digital ceiling and LED lighting
• Migrate to deep fiber design or combining with deep fiber

Collapse and Converge over Fiber

The Tellabs ONT224 is ideal for converging IoT, digital ceiling, smart building, and wireless-powered devices over the limitless capacity of a single-mode fiber-based infrastructure. This closet-based ONT also results in less fiber cabling because multiple bidirectional wavelengths on a single fiber cut fiber cabling costs in half. For powered device connectivity using Power over Ethernet (PoE), IEEE 802.3af PoE, PoE+ IEEE 802.3at (Class-4 negotiations) and IEEE 802.3bt (4PPOE) can be selected. The ONT can support any of the 24-ports of 4PPoE, supporting 802.3af/at/bt at up to 60 watts per port.

Advanced IP and Ethernet

Tellabs ONT224 offers industry-leading software-defined traffic management, security, provisioning and quality of service mechanisms. It supports enterprise VoIP connectivity with the latest unified communications systems and all enterprise IP-based video traffic (e.g., entertainment, surveillance, conferencing). Tellabs FlexSym Series enterprise focus means it supports advanced Ethernet IEEE features, such as bridging, LAG, VLAN, ACL, PoE, LLDP, NAC, 802.1x, AS-SIP, IP digital audio (Dante, CobraNet) and other must-have protocols are supported that satisfy true enterprise requirements.

Reduce Network Vulnerability Points

This one-to-one closet-based switch replacement takes advantage of OLAN’s more secure design with fewer network points of vulnerability and reduced IP addresses to management. Tellabs FlexSym ONT224 also supports industry-leading bidirectional AES-128 encryption with 60-second churning of keys. Centralized intelligence and management means fewer human touches, which directly results in the best possible network access controls.

Software Defined Technology Today

All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being controlled by the Tellabs Panorama PON Manager helps speed installations and daily operations. Centrally controlled by the Panorama PON Manager, the Tellabs ONT224 supports auto-discovery mechanisms, can be quickly provisioned using global templates and profiles, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes for everyday operations. Tellabs ONT224 is a hardware future ready for open-source and standards-based software-defined networking.

Specifications

Interfaces

• RJ-45 / Gigabit Ethernet w/PoE – 24
• SC-APC XGS-PON (G.9807) uplink – 1

Power

• Single or dual AC power inputs (purchased separately) allow for hot replacement of power modules
• Max Draw at ONT w/o PoE (Amps) – 2.0 A
• Max Draw at ONT w/PoE Max (Amps) – 21.8 A
• Consumption w/o PoE Max (Watts) – 100 W
• Consumption w/PoE Max (Watts) – 1090 W

Power over Ethernet (PoE)

• 615W of PoE with one 715W power supply, or equipped with two modules in redundant configuration
• 1000W of PoE with one 1100W power supply, or equipped with two modules in redundant configuration
• 1330W of PoE with two 715W power supplies in non-redundant configuration
• 2100W of PoE with two 1100W power supplies in non-redundant configuration
• 802.3af/at, class 0-4, up to 30W per port on all 24-ports
• Cisco UPoE Support with up to 60W on any of the 24-ports
• 802.3bt 4PPoE class 5-6, up to 60W on any of the 24-ports

Passive Optical Network

• 9.95328 Gbps burst mode upstream
• 4-9dBm launch power, -28 dBm sensitivity and -9 dBm overload
• Laser compliant FCC 47 CFR Part 15
• Class B and FDA 21 CFR 1040.10 and 1040.11, Class
• Wavelengths: Downstream 1580 nm, Upstream 1280 nm
• 9.95328 Gbps downstream receive
• ITU-T G.984.2 Amd1 Class B+ lasers supported
• APD receiver and DFB transmitter
• Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
• Activation with automatically discovered Serial Number (SN) and password
• Bi-directional AES-128 encryption with 60 second churning of keys
• Forward Error Correction (FEC)
• IP DSCP to 802.1p mapping
• Support for multicast GEM port
• Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
• SFF-type laser SC/APC connector

IP/Ethernet

• 1024 MAC addresses
• Supports Dante and CobraNet digital audio systems over IP
• Link Layer Data Protocol (LLDP) for auto-provisioning, inventory and PoE power management.
• Jumbo frames of up to 9K
• 10/100/1000BT
• IEEE 802.1x Port-Based Authentication/MAB
• Network Access Control (NAC)
• Virtual switch based on 802.1Q VLAN
• 25 VLANs per Ethernet port
• 125 Unique VLANs per ONT
• VLAN tagging/untagging, 802.1p bit marking/remarking per Ethernet port
• VLAN translation, trunking
• QoS and security policies based on VLAN-ID, 802.1p, DSCP
• MAC address limiting to prevent flooding attacks and limiting the number of devices attached to a port
• IPv6 capable for enterprise services
• L2-L4 Access Control Lists (ACLs)
• Upstream ACL rate limiting
• Maximum Transmission Unit (MTU) 9216 bytes
• IGMP v2/v3 snooping
• VLAN trunking and stacking

Operations, Administration and Maintenance (OAM)

• Alarming, events and performance monitoring
• Complete service provisioning of Ethernet
• Remote image download over OMCI as well as activation and rebooting
• Remote ONT reset
• Holds two versions of software with image integrity checking and automatic rollback
• Standards-compliant OMCI as defined in ITU-T G.988
• Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get & Get Next commands

Alarm / Monitor / Test

• ONT LAN-LOS (Ethernet port alarm on LAN side)
• ONT Dying Gasp (Power Loss)
• Software Version Mismatch / Download Failure
• ONT BER(bit error rate) Performance Monitoring
• ONT RDI (RDI Indication from ONT)
• ONT REI (REI Remote Error Indication from ONT)
• ONT LOPL-SF (Loss of Ploam due to Software Failure on ONT)
• ONT LOPL-LOA (Loss of Acknowledge)
• ONT LOPL-OAML (LOPL-LOAM)

Compliance

• FCC
• CE
• UL
• TAA

LED Indicators

• PON – Link status
• Ethernet link/Activity (per port)
• Ethernet Speed (per port)
• FAN – status

Management

• Tellabs Panorama PON Manager
• ONT has no local management access.

Software Support

• Minimum base software SR31.5 and higher.

Installations

• Mounting – 19″ and 23″ rack mounted
• OLTs supported – OLT1, OLT2, OLT6, OLT-mini plus, OLT1150, OLT1150E, OLT1134AC, OLT1131. Bolt OLT

Ordering Information

• ONT224 Part Number – 81.11G-ONT224-T
• 715W POWER SUPPLY Part Number – 81.11P-PW715W
• 720W POWER SUPPLY, C15 CORD REQUIRED – 81.11P-PW720W
• POWER CORD C13 TO TYPE B US 3FT Part Number – 81.11W-C13TYPB-3
• FlexSym 1100W POWER SUPPLY, C15 CORD REQUIRED – 81.11P-PW1100W
• PWR AC CORD C15 TO TYPE B US 7.5FT: 81 –11W_C15TYPB

Ethernet Features

Note: PoE has the capability of delivering 48 VDC over the same copper cable as Ethernet data

• Twenty-Four (24) 10/100/1000 Base-T Ethernet ports
• Auto-sensing MDI/MDIX or manual configuration
• Power Authentication and authorization via sophisticated Network Access Control (NAC) capabilities
• 802.1QVLANs
• Ethernet ports support auto negotiation or manual configuration
• IP ToS/DSCP to 802.1p mapping
• QoS based on VLAN-ID, 802.1p bit, ToS/DSCP
• Marking/remarking of 802.1p
• IGMP v2/v3snooping
• IPv6 supported for enterprise services
• Upstream ACLs and rate limiting
• IEEE 802.3 az Energy-efficient Ethernet
• IEEE 802.1x Port-Based authentication
• Link Layer Data Protocol (LLDP) for auto-provisioning and inventory, and LLDP-MED for PoE power management
• Network Access Control (NAC) with Dynamic VLAN and Guest VLAN
• Upstream broadcast rate limiting and filtering for security control

ONT224 Connectors

The front of the ONT224 has the following connectors:

• GE1 - GE24 – 1000BT Gigabit Ethernet ports (twenty four) supporting Power over Ethernet (PoE) devices. These are standard RJ45 Ethernet port jacks..
• PON Connector – This is a standard Optical ONT connector to the Optical Line Terminal (OLT) upstream via a fiber-optic cable. It is a standard SC/APC-type connector for Single-Mode Fiber (SMF) cable. The connector is shipped with a small fiber plug to protect the PON optical connector from dust and contaminants.
• Reset – A small recessed reset button can be utilized to reset the ONT.

The ONT224 has the following rear connectors:

• ONT Fan Tray – On the far left, a small field replaceable fan unit cools the ONT and preserves the life of ONT components. The fans are redundant and each pair of fans has its own fail LED to indicate when failure has occurred. When the fans are operating normally, the fan LEDs will both be green. There are two thumbscrews which can be used to remove the fan unit and replace it in the event of a failure. The fan unit has 4 fans in two groups to provide full fan redundancy in the event of a fan failure.
• Power Supply A/B – Two redundant load-sharing, field-replaceable power supplies are supported for the unit. You can maximize redundancy and survivability by equipping both units and supplying AC power from two different circuits on different circuit breakers. Both 715W and 1100W power supplies are supported, allowing support of different PoE power loads. The Power Supplies support two LEDs:
  • Input OK – If green, the AC input to the supply is good.
  • Output OK – If green, the DC output of the supply is good.
• ONT Ground Lug – A safety ground lug is provided to provide protection from shock hazards.

ONT224 Indicators

The ONT224 has the following indicators on the front faceplate:

• Power LED – Shows status of the power supplies.
• Alarm LED – Shows current alarm status.
• PON LED – Shows status of the Passive Optical Network (PON).
• 24xPoE LEDs – Each port has an Amber PoE LED to indicate the status of the PoE for the port.
• 24xLink LEDs – Displays the Ethernet Link Status and Ethernet Activity on each port.

LED Behavior

LED	Indications		Comments
Power		Green	Input power is good for the ONT
		Dark	Power is off to the ONT or the power unit has failed.
		Amber	A redundant power supply has been removed or failed.
PON		Red	The PON is currently down, ONT is not receiving signal from the OLT.
		Green Blink Fast	The PON is up and ONT is attempting to register on the PON. If Auto Configuration is not on, use Unknown ONT option on the EMS to register ONT.
		Green Blink Slow	The board is performing software downloading.
		Green	The PON is up and operating normally.
		Dark	The ONT is booting or off.
GE (1-24)		Green	Link: Up Data: no data detected
		Green Blink	Link: Up Data: Data detected
		Dark	Link: Down or port disabled Data: No Data detected
PoE (1-24)		Amber	PoE: Powering PD
		Amber Blink	PoE: The ONT is searching for PoE PDs(powered devices). This LED will blink once every 10 seconds when searching for PDs.
		Dark	PoE: No PD detected, PoE is not being supplied or port is disabled.
Fan Left / Fan Right		Green	The fan unit is operating normally.
		Dark	The Fan Unit has failed.
In OK		Green	The 120V-240VAC input is good.
		Dark	AC Power Input is bad.
Out OK		Green	The 54VDC output of the power supply is good.
		Dark	The 54VDC output of the power supply has failed, and the power supply unit should be replaced.

ONT224 Controls and Switches

The ONT224 has only one user-operable control:

• Reset – This momentary pushbutton switch resets the ONT

The Reset switch pushbutton is accessible through a small hole on the right-hand side of the unit (when viewed from the front).

ONT224 Specifications