Any MAC

The ANY MAC ACL is used to allow any MAC address on a port. This can be used to open up specific ports on VLAN that is default deny, or for example, bind a port to a particular subnet. This would prevent the user from using any IP outside the subnet.  

EMS Any Mac Procedure   

1. Open a Panorama PON (EMS) session, click on the Profile icon button and the ACL tab.
2. Select the EMS ACL Create a new profile icon and name the ACL profile as AnyMac-1.  
3. Click on the Create Rule button and perform the following steps:
   
   

Step 1: Enter "Filter-3" in Rule Name: entry box:

Step 2: Select "Basic ACL" from the ACL Type: Dropdown

Step 3: Select "Permit "from the Action: Dropdown

Step 4: Select "Any Mac(s)" from the SourceMAC(s): dropdown

Step 5: Click on the Add button to add the MAC address and bit count to the Source Mac(s) window

Step 6: Select the MAC address entry in the Source Mac(s) window

Step 7: Enter "1" in the Max MAC(s) entry box

Step 8: Enter "1" in the Max IPs Per MAC  entry box

Step 9: Enter the IP address "192.168.1.254" in the Bound SRC IP(s): entry box

Step 10: Add Bit count: 24" in the Bound SRC IP(s): entry box

Step 11: Click on the Add button to add the Bound SRC IP(s) and bit count to the Bound SRC IP(s):  window

Step 12: Click on the Save button to save the rule profile

4. Click on the Apply button to add the ACL profile to the Profile Name window list.
5. After the Profile has been generated, the ACL status is displayed.  Click on the Close button to complete the ACL profile.

CLI ACL Any Mac Procedure 

1. Open a CLI session and create a AnyMac ACL profile.

ESUx> profile acl create name=AnyMac-1 <enter> 
success 
ESUx> _ 

1. From the ESUx> command line, input profile acl edit name=AnyMac-1 rule number=1 basic action=permit l2 et=ipv4-arp sa=any max-macs=1 l3 source-IP=192.168.1.254/24, and press Enter. Output similar to the following is displayed:

   ESUx> profile acl edit name=AnyMac-1 rule number=1 basic action=permit l2 et=ipv4-arp sa=any max-macs=1 l3 source-IP=192.168.1.254/24 <enter> success ESUx> _

Verify the CLI entry

1. From the ESUx> command line, input profile acl show name=AnyMac-1, and press Enter. utput similar to the following is displayed:

   ESUx> profile acl show name=AnyMac-1 <enter> | Access Control List Profile | |============================================================================| | Profile Name : AnyMac-1 | | | | Rule #1 | | Rule Identifier : Rule-1 | | Type : basic | | Action : permit | | | | Layer 2 | | Ethertype : IPv4/ARP (0x0800/0x0806) | | | | Source MAC(s) | | MAX Source MACs : 1 | | SA #1 : any | | | | Layer 3 | | | | Source IP/Subnet(s) | | | | Bound to SA #1 | | MAX Source IPs : 1 | | SIP #1 : 192.168.1.254/24/24 | | | |============================================================================| ESUx> _