Bridge Configuration

Note: **ne - Substitute olt for ne for the OLT2> on the CLI command path.

The bridge commands are related to all bridge-related configurations. 

• Command Path - >ne bridge
• Command Path - >olt bridge
• Object - bridge
• Actions - 
  • Edit - modify ethernet-bridge configuration (Active on SR31.4.18, OLR Version SR31.4_605054 and above)
    • block-unknown-unicast= - block unknown unicast
      • true|false
    • bridge-AGE-time= - bridge age time
      • 0-300 seconds, (default 300)
  • Show - Display detailed ethernet-bridge configuration
    • Verbose - Display verbose ethernet-bridge configuration results
  • Status - Display detailed ethernet-bridge status
    • Verbose - Display verbose ethernet-bridge status results   

Edit 

1. From an ESUx> command line, input **ne bridge edit block-unknown-unicast=true bridge-age-time=200, and press Enter. Output similar to the following is displayed: 

   ESUx> **ne bridge edit block-unknown-unicast=true bridge-age-time=200 <enter> Success ESUx> _

Bridge Show

Note: You can only edit and set the bridge age timer in the EMS. Default is 5 minutes and is the recommended setting. (300 seconds)

1. From the ESUx> command line, input **ne bridge show verbose, and press Enter. Output similar to the following is displayed:  

   ESUx> ne bridge show verbose <enter> bridge-age-time: 200 ESUx> _

Bridge Status

1. From an ESUx> command line, input **ne bridge status verbose, and press Enter. Output similar to the following is displayed: 
   
    

Next