Clone

Any RADIUS profile can be cloned. A copy of an existing NAC profile will be copied to the RADIUS Edit Profile screen.

Use the following procedure to clone a RADIUS profile:

1. Select the Profile Name from the Profile/Template List to clone and click the Clone a Current Profile () icon in the Main Menu bar or right-click the profile name and use the pop-up menu to select Clone. The Create RADIUS Profile dialog is displayed.
   
   
    
2. In the RADIUS Profile dialog, select the desired profile to clone, name it, and click on the Apply button.
3. A RADIUS Profile Create Status dialog will be displayed showing the cloned Attributes and, when complete, the Close button will be active.
   
   
    
4. When finished, with no errors reported, click on the Close button.
5.  If errors are reported, the exceptions appear in the Error Status section. Do one of the following:
   •   Click Retry to update these OLTs again
   •  Click Terminate to end the process with the errors.
6. When terminating a process with errors, a warning message confirms that the process was aborted. In the dialog that appears, click on the OK button.

   Note: Typically, these OLT errors are caused by a loss of communication between the Panorama PON server and the OLT.

7. When finished, click on the Close button. 
8. If no further profiles are to be created, click on the Cancel button to close the NAC Profile dialog.
9. Click on the Close button again to exit the NAC Profiles screen.

Previous    |   Next