››

Configure the Active OLT Sessions Certificate Validation Polling Interval

Use the following procedure to configure the certificate validation polling interval:

From the Certificate Manager Menu, input 7, and press Enter. The following message and prompt are displayed.

The maximum polling interval is 720 hours
Configure the active NE sessions certificate validation polling 
interval (in hours) [24] _

Press the Enter key to accept the default of 24 hours, or type the desired interval, in hours. The range is 0 to 720 hours.

Note: Entering 0 causes continuous polling.

The system prompts for the Panorama Certificate Administrator Username.
Panorama Certificate Administrator Name? _.

Input the Certificate Administrator Username, and press Enter. The system prompts for the Panorama Certificate Administrator Password.
Panorama Certificate Administrator Password? _.

Input the Certificate Administrator Password, and press Enter.

Note: The Certificate Administrator Username and Password is validated against the username/password database. If an incorrect Username or Password is entered, the user is re-prompted for the Username and Password. If the Username or Password is entered incorrectly three times, the Certificate Manager closes.

The system reports the modification was successful with the following message.
Security property modification successful
The Certificate Manager menu is displayed.

Previous |

FEEDBACK: Are you happy with this material?

Thank you Your feedback helps us to continually improve our content.