Delete

Use the following procedure to delete an PON Profile:

1. Select the Profile Name from the Profile/Template List to edit and click the Delete a Selected Profile () icon in the Main Menu bar or right-click the profile name and use the pop-up menu to select Delete.
2. To Delete more than one name press and hold down CTRL and select more than one profile and then select the Delete icon.
   
   
    
3. A Warning Message is displayed.
   
   
    
4. Click on the Yes button.
5. The PON Profile Delete Status dialog will be blank while the profile is updated, and the result is displayed, showing the status when complete.
   
   
    
6. When the update is finished, click on the Close button.
7.  If errors are reported, the exceptions appear in the Error Status section. Do one of the following:
   • Click Retry to update these ONTs again
   • Click Terminate to end the process with the errors.

     Note: Typically, these OLT errors are caused by a loss of communication between the Panorama PON server and the OLT,

8. When terminating a process with errors, a warning message confirms that the process was aborted. In the dialog that appears, click on the OK button.
9. When the update is finished, click on the Close button. 
10. Go to Step 2 to delete more profiles.
11. If no further profiles are to be deleted, click on the Close button to close the PON Delete Status dialog.
12. Click on the Close button again to exit the Profiles dialog.

Previous   |  Top