DhcpSnoopInspection (DSI)

Clear or show DSCP Snoop Inspection characteristics.

Note: **ne - Substitute olt for ne on the OLT2/OIU2 command lines.

• Command Path - >ne DscpSnoopInspection
• Command Path - >olt DscpSnoopInspection 
• Object - dsi
• Actions -
  • clear - Clear DSI information
    • counters - clear the DSI counters.   
    • gateways - clear the DSI Gateway IP and MAC binding
    • vlan= - vlan to clear DSI counters               
  • Show - Show DSI details
    • counters - show the DSI counters.
    • gateways - clear the DSI Gateway IP and MAC binding
    • vlan= - vlan to clear DSI counters

Clear DSI Counters/Gateways/VLANs

1. From the ESUx> command line, input **ne DhcpSnoopInspection clear counters, and press Enter. Output similar to the following is displayed:  

ESUx> **ne DhcpSnoopInspection clear counters <enter>
ESUx> _

Show DSI Counters/Gateways/VLANs

1. From the ESUx> command line, input **ne  DhcpSnoopInspection show gateways, and press Enter. Output similar to the following is displayed: 

   ESUx> **ne dhcpsnoopinspection show gateways <enter> | DSI Gateway IPs | |=========|==================|====================|======================| | Vlan Id | Gateway IP | Gateway MAC | Interface | |=========|==================|====================|======================| | 2992 | 172.28.152.1 | D8:9E:F3:B7:CD:A2 | MDS1-IO2 | |=========|==================|====================|======================| ESUx> _

Previous   |   Next