Edit

Edit the parameters of a specific ONT.

Note: * = required parameter

• Command Path - ont>edit 
• Command - Edit
• Object - 
  • * ont-id= - specifies the location of one or more ONTs 
    • MDS slot]-[PON port]-[ONT ID] (x-y-z)
  • admin= - controls operation of this ont
    • enabled | disabled
  • audible-ALeRT (alrt)= - set administrativ state for audible alert on the ont, used for locating the ONT.
    • admin - enabled | disabled 
  • DiffServ-CodePoint (dscp) - apply DiffServ-CodePoint 
    • profile= - DSCP_Downstream-tmp|DSCP_Upstream-tmp|G-ONT_QoS_DSCP-Down|G-ONT_QoS_DSCP-Up|GW-16DSCP|GW-JITC-QoS|GW-QoS-DSCP-Down|SJ-DSCP|default|tsw_dscp
  • Led-Hold-Time (lht)= - LED hold time in seconds
  • Power-Over-Ethernet (poe) - select PoE related parameters  
    • alarm-admin - controlling PoE alarm reporting (ARC)
      • All the listed edits
    • external-power= - represents power available
      • Watts 0-1000
    • threshold= - usage threshold after which lower priority services are powered down
      • % 1-99            
  • Serial-Number (sn)= - serial number expected fir ONT
    • 4 letters followed by 8 integers. ex: TSLS00000001 
  • type= - type of ONT to create
    • 120|121w|121wx|131w|140|140cl|142r|180|202|205|248|248X|702|703|704|705gr|709|709gp|712|714g|728gp|729|729gp|742g
  • user-LABEL (label)= - User defined label for the ONT
    • any alpha-numeric name

1. From the ESUx> command line, input ont edit pon-id=1.4.1 sn=TSLS01234568, and press Enter. Output similar to the following is displayed:

   ESUx> ont edit pon-id=1.4.1 sn=TSLS01234568 <enter> Edit ONT succeeded. ESUx> _

Previous  |  Next