Enable OCSP
The OCSP enables applications to determine whether a specific security certificate is valid. It may be used to satisfy the operational requirements of providing timely revocation information and to obtain additional status information. An OCSP client issues a status request to an OCSP responder and suspends until the responder indicates whether the certificate is valid or not. On the Panorama PON system, OCSP clients consist of the TConfig server and ONT729GPs.
To enable OCSP, follow these steps:
Note 1: Prior to enabling OCSP, the certificates must be imported. (See the topic PON EMS Device/Anchor Certificate.)
Note 2: Certificates must be installed on the OLT. (See the topic Securing OLAN with Certificates.)
- From the Certificate Manager menu, input 4 and press Enter. The following prompt is displayed.
Panorama Certificate Administrator Name? _ - Input the Certificate Administrator Name, and press Enter. The following prompt is displayed.
Panorama Certificate Administrator Password? _ - Input the Certificate Administrator Password, and press Enter. The following prompt is displayed, followed by the Certificate Manager menu.
Security property modification successful - The Certificate Manager menu is displayed.
FEEDBACK: Are you happy with this material?
Thank you Your feedback helps us to continually improve our content.