Interface PON Status
The tolt interfaces pon object is used to configure the characteristics of PON ports.
The configuration of PON Status is defined as follows:
.png?Policy=eyJTdGF0ZW1lbnQiOlt7IlJlc291cmNlIjoiaHR0cHM6Ly9kemY4dnF2MjRlcWhnLmNsb3VkZnJvbnQubmV0L3VzZXJmaWxlcy80MTcwMy81NDk1Mi9ja2ZpbmRlci9pbWFnZXMvcXUvMjAyNS9pbWFnZSgyNTQpLnBuZyIsIkNvbmRpdGlvbiI6eyJEYXRlTGVzc1RoYW4iOnsiQVdTOkVwb2NoVGltZSI6MTc3MDg3NzQ5OH19fV19&Signature=GyfSM~xGssxHVM1gJgJIzRaY8DGBFo96xS4HQkikUl30Srxaz~5fxb2LRe1xNz2e0b8kG26t8WtPAUIglqKZ-P-51WejFhhqY1p3Ewh8iuuVoWyuLw4HcOfdSp-fyisUV2Sx7HhEt11SycvsHV3YnT~TRTqy~dA7hnHgXjSmHG-RDsnT3pRgGSuM2nqWycWXfmowK2uvRCRdKU1AupOxJ0-0FeyGy-2IMlV6NKj7ICMvUQ86fKv40zY-4E1eWYhkV0qicR4JD3VJV-V86grKqxatkobRJe9yvDQ-2dJ4N2jMwZ~w6m54srKjNYwTIloaP48ebXM6ZEfvoL6V~JHQQg__&Key-Pair-Id=K2TK3EG287XSFC)
PON Interface Status Attributes
| Attribute | Values | Default | Req | Description |
|---|---|---|---|---|
| Aid | <MDS1-1-pon> where pon is the pon port number 1..16 |
N/A | Y | AID or Access Identifier used to identify the PON port. |
| Up-stream-line-rate | 9953280 (xgs) 1244160 (gpon) |
The upstream line rate in bits per second. | ||
| Downstream-line-rate | 9953280 (xgs) 2488320 (gpon |
The downstream line rate in bits per second. | ||
| Up-stream-available-guarantteed | The amount of bandwidth that is available for guaranteed bandwidth | |||
| Up-stream-available-fixed-real-time | The amount of cbr (fixed) bandwidth available on the PON. | |||
| Oper-state | Up | down | Whether the PON link is up or down. | ||
| Avail-state | e-notsupported e-intest e-failed e-poweroff e-offline e-offduty e-dependency e-degraded e-notinstalled e-logfull eunauthaccess |
Further description of failure. Availability state reportin not supported Test currently in progress on entity Failed due to equipment or port problem Device is powered off Device has been administered down Scheduled device is not active now Depend on device that is currently down Operational but service impacted Equipment is missing to render service Stopped due to log being full Down due to authentication failure. |
||
| Link-state | e-linkup | e-linkdown | |||
| Tcont-data | Container | How much bandwidth is allocated to each transmission container on the PON. | ||
| Index | Index of the t-cont entry. | |||
| Tcont-id | The TCONT ID used on the PON. | |||
| Max-upstream-bandwidth | The peak bandwidth allocated to this tcont | |||
| Min-upstream-bandwidth | The minimum bandwidth always allocated to this tcont. | |||
| Fixed-upstream-bandwidth | The amount of fixed bandwidth allocated to the tcont. |
Note: * = required parameter
- Command Path – tolt>interfaces>pon>status>
- Module – tolt
- Container – interfaces
- Container – pon
- Container – status
- Styles –
- *aid – AID or Access Identifier used to identify the port.
- <MDS1-1-pon> where pon is the pon port number 1..16
- Up-stream-line-rate – The upstream line rate in bits per second.
- 9953280 (xgs), 1244160 (gpon)
- Downstream-line-rate – The downstream line rate in bits per second.
- 9953280 (xgs), 2488320 (gpon)
- Up-stream-available-guarantteed – The amount of bandwidth that is available for guaranteed bandwidth.
- Up-stream-available-fixed-real-time – The amount of cbr (fixed) bandwidth available on the PON.
- Oper-state – Whether the PON link is up or down..
- Up | down
- Avail-state –
- e-notsupported – Availability state reportin not supported
- e-intest – Test currently in progress on entity
- e-failed – Failed due to equipment or port problem
- e-poweroff – Device is powered off
- e-offline – Device has been administered down
- e-offduty – Scheduled device is not active now
- e-dependency – Depend on device that is currently down
- e-degraded – Operational but service impacted
- e-notinstalled – Equipment is missing to render service
- e-logfull – Stopped due to log being full
- e-unauthaccess – Down due to authentication failure
- Link-state – .
- e-linkup | e-linkdown
- Tcont-data – How much bandwidth is allocated to each transmission container on the PON.
- Container
- Index – Index of the t-cont entry.
- Tcont-id – The TCONT ID used on the PON.
- Max-upstream-bandwidth – The peak bandwidth allocated to this tcont
- Min-upstream-bandwidth – The minimum bandwidth always allocated to this tcont.
- Fixed-upstream-bandwidth – The amount of fixed bandwidth allocated to the tcont
- Container
- *aid – AID or Access Identifier used to identify the port.
Show the PON Status
- Command Path – show>tolt>interfaces>pon>status>
- Command – show
- Module – tolt
- Container – interfaces
- Container – pon
- Container – status
- Type – Example Parameter
- status
- From the MDS1-ESUA# command line, input show tolt interfaces pon status, and press Enter. Output similar to the following is displayed:
MDS1-ESUA# show tolt interfaces pon status <enter> UP DOWN UP STREAM STREAM STREAM UP STREAM AVAILABLE MAX MIN FIXED LINE LINE AVAILABLE FIXED OPER LINK UPSTREAM UPSTREAM UPSTREAM AID RATE RATE GUARANTEED REAL TIME STATE AVAIL STATE STATE INDEX TCONTID BANDWIDTH BANDWIDTH BANDWIDTH ----------------------------------------------------------------------------------------------------------------------------------------- MDS1-1-1 1244160 2488320 1170880 820992 up - e-linkup 0 0 38459840 7936 7936 0 1 0 0 0 0 2 0 0 0 0 3 0 0 0 0 4 0 0 0 0 5 0 0 0 0 6 0 0 0 0 7 0 0 0 MDS1-1-2 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-3 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-4 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-5 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-6 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-7 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-8 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-9 9953280 9953280 9692032 6211968 up - e-linkup 0 0 9918464 256 256 0 1 0 0 0 0 2 0 0 0 0 3 0 0 0 0 4 0 0 0 0 5 0 0 0 0 6 0 0 0 0 7 9953280 5120 512 MDS1-1-10 1244160 2488320 0 0 down [ not-installed ] e-linkup MDS1-1-11 1244160 2488320 1175168 820992 up - e-linkup 0 0 33497280 6912 6912 0 1 0 0 0 0 2 0 0 0 0 3 0 0 0 0 4 0 0 0 0 5 0 0 0 0 6 0 0 0 0 7 0 0 0 MDS1-1-12 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-13 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-14 9953280 9953280 0 0 down [ not-installed ] e-linkup MDS1-1-15 1244160 2488320 1202816 820992 up - e-linkup 0 0 1240640 256 256 0 1 0 0 0 0 2 0 0 0 0 3 0 0 0 0 4 0 0 0 0 5 0 0 0 0 6 0 0 0 0 7 0 0 0 MDS1-1-16 1244160 2488320 1182592 820992 up - e-linkup 0 0 24812800 5120 5120 0 1 0 0 0 0 2 0 0 0 0 3 0 0 0 0 4 0 0 0 0 5 0 0 0 0 6 0 0 0 0 7 0 0 0 MDS1-ESUA#_
FEEDBACK: Are you happy with this material?
Thank you Your feedback helps us to continually improve our content.
On this page