››

ONT Config Examples

Place an ONT in eStop

Note: Placing an ONT in eSTOP on the PON will cause it to stop transmitting onto the PON and turn off its laser transmitter. It will still listen on the PON.

Command Path – tolt>ont>config>
Module – tolt
Container – ont
Container – config
Type – Example Parameter
- *Aid – MDS1-1-1-1
- ont forced-stop-mode true

From the MDS1-ESUA<Config># command line, input tolt ont config MDS1-1-1-1 and press Enter.
Input ont forced-stop-mode true, and press Enter.

Input commit and press Enter. Outputs similar to the following are displayed:

MDS1-ESUA<config># tolt ont config MDS1-1-1-1 <enter>
MDS1-ESUA<config-config-MDS1-1-1-1># ont forced-stop-mode true <enter>
MDS1-ESUA<config-config-MDS1-1-1-1># commit <enter>
commit complete.
MDS1-ESUA<config-config-MDS1-1-1-1># exit <enter>
MDS1-ESUA<config># _

Remove an ONT from eStop

Command Path – tolt>ont>config>
Module – tolt
Container – ont
Container – config
Type – Example Parameter
- *Aid – MDS1-1-1-1
- ont forced-stop-mode false

From the MDS1-ESUA<Config)# command line, tolt ont config MDS1-1-1-1 and press Enter.
Input ont forced-stop-mode false, and press Enter.

Input commit and press Enter. Outputs similar to the following are displayed::

MDS1-ESUA<config># tolt ont config MDS1-1-1-1 <enter>
MDS1-ESUA<config-config-MDS1-1-1-1># ont forced-stop-mode false <enter>
MDS1-ESUA<config-config-MDS1-1-1-1># commit <enter>
commit complete.
MDS1-ESUA<config-config-MDS1-1-1-1># exit <enter>
MDS1-ESUA<config># _

ONT Replacement

Note: If the user has an ONT on the PON which will be replaced with a different ONT, editing the serial number will cause the ONT to be configured into the same ONT id and configuration will be converted and assigned to the new ONT.

Command Path – tolt>ont>config>
Module – tolt
Container – ont
Container – config
Type – Example Parameter
- *Aid – MDS1-1-1-1
- ont serial-num BFWS90091696

From the MDS1-ESUA<Config># command line, input tolt ont config MDS1-1-1-1 and press Enter.
Input ont serial-num BFWS90091696, and press Enter.

Input commit and press Enter. Outputs similar to the following are displayed:

MDS1-ESUA<config># tolt ont config MDS1-1-1-1 <enter>
MDS1-ESUA<config-config-MDS1-1-1-1># ont serial-num BFWS90091696 <enter>
MDS1-ESUA<config-config-MDS1-1-1-1># commit <enter>
commit complete.
MDS1-ESUA<config-config-MDS1-1-1-1># exit <enter>
MDS1-ESUA<config># _

Show ONT Config

Command Path – show>running-config>tolt>ont>config>
Command – show
Database – running-config
Module – tolt
Container – ont
Container – config

From the MDS1-ESUA<Config># command line, input show running-config tolt ont config and press Enter.

Outputs similar to the following are displayed:

MDS1-ESUA<config># show running-cnfig tolt ont config <enter>
 tolt ont config MDS1-1-1-1
 admin-state    enabled
 location-name  ""
 equipment-type ont248
 ont host-conf voicectrl-personality unknown
 ont host-conf device-id ""
 ont host-conf username ""
 ont host-conf userpasswd ""
 ont host-conf arc-mode false
 ont host-conf sip-conf ip-address 0.0.0.0
 ont host-conf sip-conf subnet-mask 255.255.255.0
 ont host-conf sip-conf gateway-ip-address 0.0.0.0
 ont host-conf sip-conf dnsprimary 0.0.0.0
 ont host-conf sip-conf dnssecondary 0.0.0.0
 ont host-conf sip-conf vlanid 0
 ont host-conf sip-conf cfi 0
 ont host-conf sip-conf prot802-1-p 7
 ont host-conf rtp-conf ip-address 0.0.0.0
 ont host-conf rtp-conf subnet-mask 255.255.255.0
 ont host-conf rtp-conf gateway-ip-address 0.0.0.0
 ont host-conf rtp-conf dnsprimary 0.0.0.0
 ont host-conf rtp-conf dnssecondary 0.0.0.0
 ont host-conf rtp-conf vlanid 0
 ont host-conf rtp-conf cfi 0
 ont host-conf rtp-conf prot802-1-p 7
 ont host-conf ip-assignment-mode dhcpv4
 ont serial-num            BFWS90091695
 ont registration-id       ""
 ont ont-id                ""
 ont config-lock           true
 ont forced-stop-mode      false
 ont range-fail-wait-time-pots 120
 ont power-shedding pwr-restore-timer-reset-interval 30
 ont power-shedding data-shedding-interval 15
 ont power-shedding video-overlay-shedding-interval 0
 ont poe-config poe-usage-threshold 99
 ont poe-config arc-mode      false
 ont poe-config external-power-available 134226304
 ont poe-config external-bbu-power-available 40
 ont rf-cfg admin-state disabled
 ont rf-cfg agc-setting -10
 ont rf-cfg range-fail-wait-time 48
 ont rf-cfg ac-fail-wait-time 900
 ont rf-cfg ac-restore-wait-time 30
 ont rf-cfg degraded-threshold -95
 ont rf-cfg overload-threshold 25
 ont led-hold-time         120
 !
MDS1-ESUA<config># _

Show ONT Status

Command Path – show>tolt>ont>config>
Command – show
Module – tolt
Container – ont
Command – | tab

From the MDS1-ESUA# command line, input show tolt ont | tab and press Enter.

Input commit and press Enter. Outputs similar to the following are displayed:

MDS1-ESUA# show tolt ont | tab <enter>
            INSTALLED  ALARM      CP     CP           OP     AVAILABILITY  BUILD           BUILD  SYSTEM   BUILD           BUILD  SYSTEM   MODEL     INVENTORY  MANUFACTURE  CLEI  SERIAL  CONFIGURED
AID         TYPE       STATE      STATE  INFO  INDEX  STATE  STATE         DATE   VERSION  ID     VERSION  DATE   VERSION  ID     VERSION  REVISION  FORMAT     DATE         CODE  NUMBER  TYPE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MDS1-1-1-1  e-unknown  e-cleared  4            0      down   [ e-failed ]  n/a    n/a      n/a    n/a      n/a    n/a      n/a    n/a      n/a       n/a        n/a          n/a   n/a     ont248
MDS1-1-1-2  e-unknown  e-cleared  4            0      down   [ e-failed ]  n/a    n/a      n/a    n/a      n/a    n/a      n/a    n/a      n/a       n/a        n/a          n/a   n/a     ont205
MDS1-1-1-3  e-unknown  e-cleared  4            0      down   [ e-failed ]  n/a    n/a      n/a    n/a      n/a    n/a      n/a    n/a      n/a       n/a        n/a          n/a   n/a     ont248-x
MDS1-1-1-4  e-unknown  e-cleared  4            0      down   [ e-failed ]  n/a    n/a      n/a    n/a      n/a    n/a      n/a    n/a      n/a       n/a        n/a          n/a   n/a     ont202
MDS1-1-1-5  e-unknown  e-cleared  4            0      down   [ e-failed ]  n/a    n/a      n/a    n/a      n/a    n/a      n/a    n/a      n/a       n/a        n/a          n/a   n/a     ont203-w
MDS1-1-2-1  e-unknown  e-cleared  4            0      down   [ e-failed ]  n/a    n/a      n/a    n/a      n/a    n/a      n/a    n/a      n/a       n/a        n/a          n/a   n/a     ont140
MDS1-ESUA(config)# _

Show Tolt ONT Unexpected

The unexpected ONT menu gives a list of ONTs that have arrived on the PON but are not currently configured.

Command Path – show>tolt>ont>config>
Command – show
Module – tolt
Container – ont

Command – unexpected

Attribute	Value	Comment
Serial-Number	String	The serial number of the ONT.
Pon-id	MDS1-1-<pon> where pon 1..16	The AID of the PON where the ONT was located.
Type	String	The type of ONT that was found on the PON.
Arrival-time	Date time	The date and time when the ONT first arrived onto the PON.
Arrival-count	1..65535	The number of times the ONT has “arrived” on the PON.

From the MDS1-ESUA# command line, input show tolt ont unexpected and press Enter.

Input commit and press Enter. Outputs similar to the following are displayed:

MDS1-ESUA# show tolt ont unexpected <enter>
          SERIAL                                                         ARRIVAL
NUMBER        PON ID    TYPE     ARRIVAL TIME                  COUNT
------------------------------------------------------------------------
BFWS00315647  MDS1-1-1  ont202    FRI JAN 1 2021 08:12:37.073  101
BFWS00368780  MDS1-1-1  ont248w   FRI JAN 1 2021 08:14:52.066  120
BFWS00377162  MDS1-1-1  ont205    FRI JAN 1 2021 08:14:07.064  124
BFWS00380026  MDS1-1-1  ont203w   FRI JAN 1 2021 08:14:52.065  106
BFWS6F5951C0  MDS1-1-1  ont224    FRI JAN 1 2021 08:14:52.065  124
BFWS90091695  MDS1-1-1  ont248    FRI JAN 1 2021 08:14:07.065  120
MDS1-ESUA# _

FEEDBACK: Are you happy with this material?

Thank you Your feedback helps us to continually improve our content.

On this page

Place an ONT in eStop