Network Element

Use the following procedure to view or edit the Network Elements of an OLT:

1. Logon to EMS and in the Network common tree, right-click on the target OLT and select Properties from the dropdown list.
   
   
2. In the ONT property dialog, click the Network Element tab.
3. The Network Element attributes are displayed.
   
   OLT Properties - Network Element Tab (Tellabs 1134 Example)
   
   
   
   Refer to the table below for field descriptions.
   
   Configuration View - Network Element Tab (Ethernet OLT) 
    

   Field	Description
   IP Address	IP address of the OLT
   OLT Type	Type of OLT
   Target Identifier	Target identifier for the selected OLT
   Cable & Pair (Not applicable to Enterprise GPON OLTs)
   Cable ID	User-defined values that identify the voice and/or data cables. Entry is limited to 10 alphanumeric characters. These entries can also be provisioned during Add OLT (refer to Adding a Tellabs 1100 Series OLT). Note: The Cable ID and Starting Pair Count fields can be edited if no cross-connections have been provisioned on the NE. If cross-connections are provisioned, these fields are protected as shown above.
   Status
   Alarm Status	Highest active alarm present on the OLT.
   Operational Status	Operational status of the OLT; either enabled or disabled.
   System Up Time	Indicates the total system up time for this OLT.

Previous   |   Next