Network Properties
Panorama PON displays configuration properties directly from the Common Tree from the Property pop-up menu.
Network Prperty Dialog
To display properties:
- In the Common Tree, select and right-click the Network node (
), Then select Property. The Network Property dialog displays.
Figure 1: Assign Profile and Admin State
- In the Network Property dialog, the total number of OLTs, by type, are listed.
- Click the Close button to exit the Network Property dialog.
Working with Internal Reserved VLANs
 |
ALERT! It is recommended that VLANs 4000-4007, 4011 and 4012 are not used for configuring the system and services. These VLANs are reserved for internal use by the Tellabs 1100 Series system. |
Tellabs 1100 Series OLTs use a range of internal network VLANs (2-4094) to route incoming traffic. Within this internal VLAN range, 10 VLANs are reserved for traffic management, control functions, and to transport internal services. The reserved VLAN range defaults to 4000-4007, 4011 and 4012, respectively. Do no use this range of VLANs for other purposes.
This chapter discusses the following:
Send feedback on this topic to Tellabs.