OIU8

OIU8 Overview

The Tellabs FlexSym OIU8 supports both ITU-T 984 G-PON and ITU-T G.9807/G.987 XGS-PON 10G connectivity down to the Optical Network Terminals (ONT). It provides flexible choices for designing a modern enterprise network to exactly align with contemporary connectivity such as IoT, wireless, open/shared office and smart buildings demands. Efficiently converge all enterprise connectivity by leveraging fiber cabling's limitless capacity deep into your buildings and campus by exactly equipping the OIU8 with the precise 2.5G and 10G speed that is warranted - thus, minimizing energy and costs.

OIU8

Features

Open-source and standards-based Software Defined Networking (SDN) ready, plus NG-PON2 capable with future software
8-port PON service module with XFP selectable ITU-T 984 G-PON 2.5G or ITU-T G.9807/G.987 XGS-PON symmetrical 10G connectivity
XGS-PON bi-directional AES128 Encryption with churning key with Tellabs FlexSym ONT205
Compatible with OIU7 for cost-effective and graceful migration from G-PON 2.5G to XGS-PON 10G and then NG-PON2 40G
Enterprise data including wireless access, access control, security, surveillance, building environment and automation
Environmentally-hardened for remote deployments in areas with no air conditioning nor heating

Highlights

Scalability

Tellabs OIU8 scales from 2.5G G-PON to symmetrical 10G XGS-PON to 40G NG-PON2. Optical distribution network splits can be designed with up to 1:64 split ratio with 10km reach. With proper optical budget and split ratio design, the extended optical reach can be as far as 30 km with a 1:16 split ratio. Further capacity scalability can be achieved since it is NG-PON2 capable with future software upgrades. It is also compatible with QOIU7 for side-by-side cost-effective operations.

Stability

The Tellabs OIU8 provides industry-leading fiber route diversity and geographically dispersed OLTs with FSAN-based Type-B PON redundancy. This redundancy provides for port-to-port, card-to-card and OLT-to-OLT protection.

Software Defined LAN

The Tellabs OIU8 can support open-source and standards-based SDN with future software upgrades.

Security

Industry-leading bi-directional AES128 Encryption with churning key every minute is provided for ultimate security - that's two-way encryption securing the downstream and upstream traffic!

Simple

All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being controlled by the Tellabs Panorama PON Manager helps speed installations and daily operations. Centrally controlled by the Tellabs Panorama PON Manager, the Tellabs OIU8 supports quick provisioning using global profiles, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes for everyday operations.

Services

The Tellabs OIU8 service card connects contemporary voice, video, data, wireless access, access control, security, surveillance, building environmental and building automation inside buildings and across extended campus. This is inclusive of must-have enterprise features and functionality such as, bridging, access security, mission-critical reliability and operational efficiencies.

Specifications

Physical

Height: 10.8 in/27.4 cm
Width: .87 in/2.2 cm
Depth: 9.2 in/23.4 cm
Weight: 1.1 lb/.49 kg

Passive Optical Network

Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
Eight (8) PON ports per card
Up to 64-way optical split
512 UNIs per PON port
Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
Activation with automatically discovered Serial Number (SN) and password
AES-128 bi-directional encryption with 60 second churning of keys
Forward Error Correction (FEC)
IP DSCP to 802.1p mapping
Support for multicast GEM port

ITU-T G.9807/G.987 10G PON

Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
Connectors: SC UPC XFP module
Wavelength downstream: 1580 nm
Wavelength upstream: 1280 nm
9.95328 Gbps burst mode upstream
9.95328 Gbps downstream receive
Maximum split ratio 1:64 (reach 6.2 miles/10 km)
Maximum reach: 18.5 miles/30 km (split ratio 1:16)
Optical budget: 28 dB (Class B+)

ITU-T G.984 2.5G PON

ITU-T G.984 compliant
Connectors: SC UPC XFP module
Wavelength upstream: 1310 nm ± 50 nm
Wavelength downstream: 1490 nm ± 10 nm
Maximum split ratio 1:64 (reach 6.2 miles/10 km)
Maximum reach: 18.5 miles/30 km (split ratio 1:16)
Optical budget: 28 dB (Class B+)

Compliance

NEBS
UL
FCC

Power

Max power: 90 W

Management

Tellabs Panorama PON Manager
Software Support
Holds two versions of software with image integrity checking and automatic rollback
Minimum base software SR31.0 and higher

Installation

OLT1134 and OLT1134AC (ESU32)
OLT6 (ESU32)
QOIU7 compatible

Environmental

Relative humidity: 5.0% to 95%, noncondensing
Temperature: -40° F to 158° F/ -40° C to +70° C

LED Indicators

LED Indicators

STAT - Shows operational status of the system
PON 1-8 Link and signal Loss LINK - Indicates the optical status of attached ONTs

OIU8 LED Behavior

LED		Comments
STAT - System Status	Red Solid	Upon insertion, the STAT LED illuminates red solid while the card performs internal power-up diagnostics. Upon completion of initialization, the STAT LED illuminates solid GREEN.
	Green Blink Fast	When the STAT LED indication is green, blinking fast (Initializing), the LED blinks at a ½ second (½ second on, ½ second off) duty cycle to indicate the unit is currently in the process of initializing.
	Green Blink Slow	When the STAT LED indication is green blinking slow (Downloading), the LED blinks at a 1-second duty cycle (1 second on, 1 second off).
	Green Solid	When the STAT LED indication is green solid (Operational), the Unit is up,
	Dark	When the STAT LED indication is dark, the power is off.
PON Low Signal - Indicates the power status of the PON	Green Solid	When the PON Low Signal LED indication is green sold, it indicates that All ranged ONT serial numbers are above the SD threshold. This LED shall not indicate the state of any missing or unexpected ONTs. The Intent of this state is to indicate that the optical quality is good for all ranged ONTs.
	Amber Solid	When the PON Low Signal LED indication is amber solid, it indicates that one or more Ranged ONT serial numbers have crossed the SD BER threshold. This state indicates that for the ranged ONTs, maintenance is required on the PON.
	Red Solid	When the PON Low Signal LED indication is red solid, it indicates that all provisioned ONTs are below SF. This can be measured by all being in a failed/LOPL-LOS state. The intent is that this LED go red when there is no received signal on the PON or all received signals are below SF.
	Dark	When the PON Low Signal LED indication is dark, it indicates that no ONTs have been provisioned on the PON. Unexpected ONTs are ignored.
PON Link - Indicates the optical status of the PON	Green Solid	When the PON Link LED indication is green solid, it indicates that all Provisioned ONT serial numbers are ranged on the PON and there are no unexpected ONTs. The state of the PON is good.
	Yellow Solid	When the PON Link LED indication is yellow solid, it indicates that at least one provisioned serial number exists and has failed (LOPL-LOS) or one or more unexpected ONTs have been detected on the PON.
	Red Solid	When the PON Link LED indication is red solid, it indicates that all provisioned ONT serial numbers are failed.
	Dark	When the PON Link LED indication is dark, it indicates that no ONT serial numbers are provisioned on the PON and no unexpected ONTs are detected on the PON.