Add OLT to Panorama PON

Adding the OLT to Panorama PON

After the OLT has been initially configured (or turned up) it can be added to the Tellabs Panorama PON element management system (Panorama). Panorama is a graphical user interface (GUI) that provides end-to-end management of the Optical LAN. Panorama simplifies LAN management by providing:

Centralized intelligence
Management of the OLT, optical network terminals (ONT) and subtended devices.
Discovery and end-to-end network views for quick actions
Automation to speed provisioning and moves, adds and changes
Consistency to reduce error and LAN downtime
Portability across managed LANs

To add the OLT to Panorama:

Launch the Add OLAN OLT Wizard from the Main Menu by selecting Tools > Wizard > Add OLAN OLT

Enter the IP address of the OLT in the IP Address text field, select the ERASE configuration data from the OLT radio button and click the Next button.

Note: Selecting the ERASE option tells the system to cleanup any residual provisioning that might result from component reuse. The data collected during the OLT turnup process will not be erased.

If Panorama is able to communicate with the OLT, it will display a summary of its turnup data. Confirm the data and click the Next button. The OLT Type may differ slightly depending on the OLT type you are adding to Panorama.

Enter the Target Identifier (TID) in the Target Identifier text box and enter the appropriate time zone data. Click the Next button.

Note: The Template section of this dialog provides a mechanism for automatic discovery and provisioning of PONs, ONTs and Ethernet ports. You can learn more about auto configuration in the Application Note: ENG-010407 ONT Auto Configuration Support

Click the Confirm and Apply Button.

Panorama will add the OLT. This will take a few minutes. When the add is completed, click the Finish button.