Use this menu to import ONT Anchor Certificates.

1. From the Certificate Manager main menu, lnput 9 and press Enter. The following sub-menu and prompts are displayed:
   
    1.Display Current ONT Anchors in the ONT Anchor Archive (.tgz).
    2.Deploy an ONT Anchor Archive.
    3.Append to the ONT Anchor Archive.
    4.Delete from the ONT Anchor Archive.
    5.Replace the ONT Anchor Archive with a folder's contents.
    6.Create the ONT Anchor Archive from a folder's contents.
    7.Start the Http Server.
    8.Stop the Http Server.
    10) Exit.
    

2. The following informational message appears after the menu is displayed.

   C:TellabsPanoramaPONbbmgrserver>set EMS_HOME=C:TellabsPanoramaPONbbmg

3. The user is prompted to enter the Certificate Administrator username and password.

   Panorama Certificate Administrator Name? <CertAdmin username> Panorama Certificate Administrator Password? <CertAdmin password>

   Warning: ONT Anchor Archive changes only take effect after restarting the Http Server. Please make sure you restart the Http Server using the Stop and Start commands below.

1.Display Current ONT Anchors in the ONT Anchor Archive (.tgz).           
2.Deploy an ONT Anchor Archive.            
3.Append to the ONT Anchor Archive.              
4.Delete from the ONT Anchor Archive.              
5.Replace the ONT Anchor Archive with a folder's contents.              
6.Create the ONT Anchor Archive from a folder's contents.              
7.Start the Http Server.              
8.Stop the Http Server.              
10) Exit.                              
Enter an index from the menu above: _

Display Current ONT Anchors in the ONT Anchor Archive (.tgz)

To display the current ONT anchors in the ONT anchor archive (.tgz) file, follow these steps:

1. Input 1, and press Enter. The following information is displayed.

   C:TellabsPanoramaPONbbmgrserver>set EMS_HOME=C:TellabsPanoramaPONbbmgr Displaying Contents of Archive: C:TellabsPanoramaPONbbmgrhttpfilecertificatesanchorontRed- com-Avaya-Anchors.tgz daveAvaya-cacert1.pem daveAvaya-cacert2.pem daveAvaya-cacert3.pem daveAvaya-cacert4.pem

2. The ONT Anchor Certificate menu is displayed.
3. If operations on the ONT Anchor Certificate menu are complete, type 10, and press Enter to return to the Certificate Manager menu.

Deploy an ONT Anchor Archive

To deploy an anchor archive, follow these steps:

1. Input 2, and press Enter. The following prompt is displayed.

   Enter the full path of the anchor archive (.tgz) to deploy: _

2. Input the full path to the anchor certificates, including the .tgz filename, and press Enter. The following messages are displayed.

   User choses file: c:certsRedcom-Avaya-Anchors.tgz deploying c:certsRedcom-Avaya-Anchors.tgz

3. The ONT Anchor Certificate menu is displayed.
4. When operations in the ONT Anchor Certificate menu are complete, input 10, and press Enter to return to the Certificate Manager menu.

Append to the ONT Anchor Archive

To append to the ONT anchor archive, follow these steps:

1. Input 3, and press Enter. The following prompt is displayed.

   Enter a folder or file (pem,p12,der) to append to the archive: _

2. Input the folder or file (pem, p12, or der) to append, i.e., C:certsxyz or c:certsxyzabd.pem, to the current archive, and press Enter. The following messages are displayed.

   User choses file: c:certsRedcom-Avaya-Anchors.tgz deploying c:certsRedcom-Avaya-Anchors.tgz

3. The ONT Anchor Certificate menu is displayed.
4. When operations in the ONT Anchor Certificate menu are complete, input 10, and press Enter to return to the Certificate Manager menu.

Delete from the ONT Anchor Archive

Use the following procedure to delete from the ONT anchor archive.

1. Input 4, and press Enter. The following prompt is displayed.

   Enter the anchor certificate (i.e. .pem) name to remove from the archive: _

2. Enter the folder or file (pem, p12, or der) to delete, i.e., C:certsxyz or c:certsxyzabd.pem, from the current archive, and press Enter. The following messages are displayed.

   C:TellabsPanoramaPONbbmgrserver>set EMS_HOME=C:TellabsPanoramaPONbbmgr Anchor Certificate ca2.pem was removed successfully.

3. The ONT Anchor Certificate menu is displayed.
4. When operations in the ONT Anchor Certificate menu are complete, type 10, and press Enter to return to the Certificate Manager menu.

Replace the ONT Anchor Archive with a Folder's Contents

Use the following procedure to replace the ONT anchor archive with a folders content.

1. Input 5, and press Enter. The following prompt is displayed.

   Enter the folder of anchor certificates to import from: _

2. Input the folder or file (pem, p12, or der) to replace (i.e., C:certsxyz or c:certsxyzabd.pem,) the current archive, and press Enter.
3. The ONT Anchor Certificate menu is displayed.
4. When operations in the ONT Anchor Certificate menu are complete, input 10, and press Enter to return to the Certificate Manager menu.
    

Create the ONT Anchor Archive from a Folder's Contents

Use the following procedure to create the ONT anchor archive from the contents of a folder.

1. Input 6, and press Enter. The following prompt is displayed.

   Enter the name of the archive to create (ex. tellabsONTAnchors.tgz):

2. Input the filename, in .tgz format, of the archive file that is to be created, and press Enter. The following message is displayed.

   C:TellabsPanoramaPONbbmgrserver>set EMS_HOME=C:TellabsPanoramaPONbbmgr

3. The ONT Anchor Certificate menu is displayed.
4. When operations in the ONT Anchor Certificate menu are complete, input 10, and press Enter to return to the Certificate Manager menu.

Start the HTTP Server

Use the following procedure to start the HTTP server.

1. Input 7, and press Enter. The following prompt is displayed.

   Start the Panorama HTTP Server [y] _

2. Input y, and press Enter, to start the HTTP server. The following message is displayed.

   Starting Panorama HTTP Server.........................

3. The ONT Anchor Certificate menu is displayed.
4. When operations in the ONT Anchor Certificate menu are complete, type 10, and press Enter to return to the Certificate Manager menu.

Stop the HTTP Server

Use the following procedure to stop the HTTP server.

1. Input 8, and press Enter. The following prompt is displayed.

   Stop the Panorama HTTP Server [y] _

2. Input y, and press Enter to stop the HTTP server. The following message is displayed.

   Stop the Panorama HTTP Server [y] _

3. Input y, and press Enter to stop the HTTP server. The following message is displayed.

   Stopping Panorama HTTP Server.........................

4. The ONT Anchor Certificate menu is displayed.
5. When operations in the ONT Anchor Certificate menu are complete, input 10, and press Enter to return to the Certificate Manager menu.