Description

Introduction

The Tellabs^® ONT140C/140CL Optical Network Terminal (ONT) is part of the Tellabs 100 series of optical network terminals (ONT) for Gigabit Passive Optical Networks (GPON).

The ONT140C/140C provides four (4) gigabit Ethernet connections and delivers up to 60W of remote power, supporting the IEEE 802.3af and 802.3at standards; including Class-4 negotiations.

Note: The ONT140C remote power to connected devices is controlled through a PoE Switch; remote power to connected devices on the ONT140CL does not require a PoE Switch.

The ONT140C/140CL supports multiple mounting options. It can be integrated with office furniture, secured to a wall, mounted underneath a surface or just be freestanding.

The plenum rated ONT140C can be deployed with an optional plenum bracket to support mounting the ONT140C above ceilings and in other plenum spaces.

The ONT140C/140CL can be deployed with the Tellabs OLT1150/OLT1150E, OLT1134AC, FlexSym OLT1, FlexSym OLT2, FlexSym OLT6, FlexSym BOLT, and the FlexSym OLT-mini Plus optical line terminals.

ONT140C/140CL Differences

The Tellabs^® ONT140CL Optical Network Terminal (ONT) has all the same features and look and feel as the ONT140C with the following exceptions:

1. The buzzer was removed.
2. The 140CL is no longer plenum rated  and is marked with "Not Plenum Rated" see Figure 1.
3. The ability to power the ONT from a PoE switch was removed.
4. The 140CL can still be powered by a 48V power source on the RJ45 connector.

Figure 1 - ONT140CL

Features

The ONT140C/140CL provides the following features:

Passive Optical Network

• Fully ITU-T G.984-compliant framing
• APD Receiver / DFB Transmitter
• 0.5-5dBm launch power, -27 dBm sensitivity and -8 dBm overload
• Bi-directional AES-128 encryption with 60 second churning of keys
• Forward Error Correction (FEC)
• IP DSCP to 802.1p mapping
• Multicast GEM port support for IPTV
• Compliance with ITU-T G.983.2, G.984 (.1/.2/.3/.4) and G.988 standards
• SFF-type laser SC/APC connector
• Wavelengths: Downstream 1310 nm, Upstream 1490 nm
• 1.244 Gbps burst mode upstream
• 2.488 Gbps downstream receive
• Laser compliant FCC 47 CFR Part 17
• Class B and FDA 21 CFR 1040.10 and 1040.11, Class I
• Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
• Activation with automatically discovered Serial Number (SN) and password

IP/Ethernet

• Four (4) 10/100/1000 Base-T Gigabit Ethernet RJ-45 connectors
• MAC address limiting to prevent flooding attacks and limiting the number of devices attached to a port
• IGMP v2/v3 snooping
• IEEE 802.1x Port-Based Authentication/MAB
• Link Layer Data Protocol (LLDP) for auto-provisioning, inventory and remote power management.
• L2-L4 Access Control Lists (ACLs)
• Upstream ACL rate limiting
• Maximum Transmisson Unit (MTU) 1546 bytes
• Supports Dante and CobraNet digital audio systems over IP
• Virtual switch based on 802.1Q VLAN
• 255 MAC addresses per port
• 25 VLANs per Ethernet port
• VLAN tagging/detagging, marking/remarking per Ethernet port
• VLAN trunking and stacking
• IP capable for enterprise services
• PoE: 802.3af/at, class 0-4, up to 30W per port (PoE Switching only active on ONT140C)
• IEEE 802.3az Energy-efficient Ethernet
• Network Access Control (NAC) with Dynamic VLAN, and Guest VLAN
• QoS and security policies based on VLAN-ID, 802.1p, DSCP

Operations, Administration and Maintenance (OAM)

• Complete service provisioning, such as Ethernet and VoIP
• Holds two versions of software with image integrity checking and automatic rollback
• Standards-compliant OMCI as defined in ITU-T G.988
• Alarming, events and performance monitoring
• Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get, and Get Next commands
• Remote image download over OMCI as well as activation and rebooting

Security

Tellabs has implemented unique advanced security features to protect enterprise networks. The ONT140C/140C supports security across the optical distribution network and end-to-end over the OLAN system, such as encryption of traffic on the PON using the Advanced Encryption Standard AES-128 and Access Control Lists (ACL) at Layer 2 through 4 levels.

The ONT supports advanced dynamic assignment of services to a port via the use of Network Access Control (NAC) with fall back to a Guest VLAN. The ONT supports IEEE 802.1x port-based authentication and MAB. This prevents unauthorized access to ports and offers RADIUS authentication for users and distribution of policy to end users based on their login.

Connectors and Indicators

Connectors

The front face of the ONT140C/140CL has four (4) Gigabit Ethernet connectors (GE1-GE4):

The rear face of the ONT140C/140CL has four (4) distinct connectors:

• Optical Fiber Connector - to connect the ONT140C/140CL to an optical splitter back to the OLT.
• Eight-Pin Connector - for the Tellabs AC power module for local power supply
• Barrel Connector - for an external AC power module. 
• RJ-45 Connector - for power from a remote power source (PoE function not active on ONT140CL)
   

The following table describes each of these connectors (from left to right):

Connector	Description
	Optical fiber single-mode connector
	Eight-pin connector used for the Tellabs AC power supply
	Barrel connector used for the external AC power module
	RJ-45 cable connector used to provide DC power from a remote power source when CAT5 cabling exists and is reused for powering only (PoE function not active on ONT140CL)

Indicators

The ONT140C/140CL front face contains two pairs of LEDs for each RJ-45 connector (representing speed and link activity) and the PON LED as shown below:

LED Behavior

LED	Indications		Comments
PON		Dark	The PON is not connected
		Green Blinking	The device is attempting to establish the PON connection
		Green	The PON connection is connected and working properly
Ethernet Link / Activity		Dark	No activity or port is admin down
		Green	Link is active and idle PoE is provided, if requested, on ONT140C only
		Green Blink	Activity on the link. PoE is provided, if requested, on ONT140C only
		Alternating Green/Amber	PoE power has been denied on ONT140C only, or a power fault, such as a short
		Amber	Port is locked out
Ethernet Speed		Dark	10Mbps
		Yellow	100Mbps
		Green	1Gbps

Manual Controls and Switches

The ONT140C/140CL has only one user-operable control; the Reset Button. The Reset Button is accessible through a small hole on the front face of the unit.

The reset button can be used to perform the following:

• Reboot: Pressing and holding the Reset Button for 5 to 10 seconds forces the ONT to reboot.
• Factory Reset: Pressing and holding the Reset Button for more than 30 seconds, resets the ONT to factory defaults, clearing any persistent OMCI data.

Specifications

The ONT140C/140CL specifications are listed in the following table: