Description

• MG1 (10G) - Muti-gig service port supporting 10G/5G/2.5G/1G/100M speeds.
• MG2 (2.5G) - Multi-gig service port supporting 2.5G/1G/100M speeds.

The ONT202 provides up to 120W of PoE power. It is plenum rated with a metal enclosure and features an integrated fiber management system.

Industrial temperature tolerance and high PoE capacity make the ONT202 well suited to support outdoor Wi-Fi and IP surveillance cameras.

The ONT202 supports multiple mounting options including direct mount on a double gang electrical box and DIN rail flush mount. An optional bracket is available for wall and under-surface mounting. An optional plenum bracket supports mounting the ONT202 above ceilings and in other plenum spaces. The ONT202 can also be rack mounted using an optional shelf and bracket for higher density applications.

The ONT202 supports Power over Ethernet (PoE) standards IEEE 802.3af, 802.3at, 802.3bt (4PPoE), and Cisco UPOE^® (Universal Power over Ethernet). It can deliver up to 120W (2x60W) of PoE when powered by the 150W AC wall adapter, 60W of PoE when powered by the 75W AC wall and up to 90W of PoE when powered remotely.

The ONT202 can be deployed with the Tellabs OLT1150/OLT1150E, OLT1134AC, FlexSym OLT1, FlexSym OLT2, FlexSym OLT6, FlexSym BOLT, and the FlexSym OLT-mini Plus optical line terminals.

Features

The FlexSym ONT202 provides the following features:

Passive Optical Network

• ITU-T G.984.1 Amd 1 Class B+
• APD Receiver / DFB Transmitter
• 4-9dBm launch power, -28 dBm sensitivity and -9 dBm overload
• Bi-directional AES-128 encryption with 60 second churning of keys
• Forward Error Correction (FEC)
• IP DSCP to 802.1p mapping
• Multicast GEM port support for IPTV
• Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
• SFF-type laser SC/APC connector
• Wavelengths: Downstream 1580 nm, Upstream 1280 nm
• 9.95328 Gbps burst mode upstream
• 9.95328 Gbps downstream receive
• Laser compliant FCC 47 CFR Part 15
• Class B and FDA 21 CFR 1040.10 and 1040.11, Class I
• Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
• Activation with automatically discovered Serial Number (SN) and password

IP/Ethernet

• MAC address limiting to prevent flooding attacks and limiting the number of devices attached to a port
• IGMP v2/v3 snooping
• IEEE 802.1x Port-Based Authentication/MAB
• Link Layer Data Protocol (LLDP) for auto-provisioning, inventory and PoE power management.
• PoE: Cisco UPoE Support with up to 60W per port on all ports
• PoE: 802.3bt 4PPoE class 5-6, up to 60W per port on all ports.
• L2-L4 Access Control Lists (ACLs)
• Upstream ACL rate limiting
• Maximum Transmission Unit (MTU) 9216 bytes
• Supports Dante and CobraNet digital audio systems over IP
• Virtual switch based on 802.1Q VLAN
• 1024 MAC addresses
• 25 VLANs per Ethernet port
• VLAN tagging/detagging, marking/remarking per Ethernet port
• VLAN trunking and stacking
• IPv6 capable for enterprise services
• PoE: 802.3af/at, class 0-4, up to 30W per port on all ports
• Network Access Control (NAC)
• QoS and security policies based on VLAN-ID, 802.1p, DSCP

Operations, Administration and Maintenance (OAM)

• Complete service provisioning, such as Ethernet and VoIP
• Holds two versions of software with image integrity checking and automatic rollback
• Standards-compliant OMCI as defined in ITU-T G.988
• Alarming, events and performance monitoring
• Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get, and Get Next commands
• Remote image download over OMCI as well as activation and rebooting

Security

Tellabs has implemented unique advanced security features to protect enterprise networks. The ONT202 supports security across the optical distribution network and end-to-end over the OLAN system, such as encryption of traffic on the PON using the Advanced Encryption Standard AES-128 and Access Control Lists (ACL) at Layer 2 through 4 levels.

The ONT supports advanced dynamic assignment of services to a port via the use of Network Access Control (NAC) with fall back to a Guest VLAN. The ONT supports IEEE 802.1x port-based authentication and MAB. This prevents unauthorized access to ports and offers RADIUS authentication for users and distribution of policy to end users based on their login.

Connectors and Indicators

Connectors

The back edge of the FlexSym ONT202 has 5 connectors:

• XGS-PON Optical Connector - Optical port to connect the ONT to the upstream Optical Line Terminal (OLT) over fiber-optic cable. It is a standard SC/APC-type connector for Single-Mode Fiber (SMF). The connector is protected by a small, black plastic insert in shipping.
• MG2 (2.5G) - Multi-gig service port supporting 2.5G/1G/100M speeds.
• MG1 (10G) - Multi-gig service port supporting 10G/5G/2.5G/1G/100M speeds.
• DC 54V - DC power input. This is a power connector that mates with a Phoenix-type pluggable terminal connector (5.08 mm pitch 2P), allowing remote bulk DC power to be used. Remote DC power is limited to 100 VA by NEC electrical code for class 2 low voltage connections.

Indicators

The top of the ONT has the following LED indicators near the front edge:

• MG2 - shows status of the 2.5G multi-rate service port
• MG1 - shows status of the 10G multi-rate service port
• XGS-PON - shows status of the 10G Symmetrical - Passive Optical Network (XGS-PON)
• Power - shows status of the DC power input

ONT202 LED Behavior

LED	Indications		Comments
Power		Green	When the ONT202 Power LED indication is green, input power is good to the ONT.
		Dark	When the PONT202 Power LED indication is dark, power is off to the ONT or power unit has failed.
XGS-PON		Red	When the ONT202 XGS-PON LED indication is red, the PON is currently down, ONT is not receiving a signal from the OLT.
		Green Blink Fast	When the ONT202 XGS-PON LED indication is Green Blink Fast, the PON is up and the ONT is attempting to register. If Auto Configuration is not enabled, use the Unknown ONT option in Panorama PON Manager to register the ONT.
		Green Blink Slow	When the ONT202 XGS-PON LED indication is green blink slow, the board is performing a software download.
		Green	When the ONT202 XGS-PON LED indication is green, the PON is up and operating normally.
		Dark	When the ONT202 XGS-PON LED indication is dark, the ONT is booting
MG1-MG2		Green	When the ONT202 MG1-MG2 LED indication is green: • Link (Up) • PoE (No PD Detected) • Data (No data detected)
		Green Blink	When the ONT202 MG1-MG2 LED indication is green blink: • Link (Up) • PoE (No PD Detected) • Data (Data detected)
		Amber	When the ONT202 MG1-MG2 LED indication is amber: • Link (Up) • PoE (Powering PD) • Data (No Data Detected)
		Amber Blink	When the ONT202 MG1-MG2 LED indication is amber blink: • Link (Up) • PoE (Powering PD) • Data (Data Detected)
		Dark	When the ONT202 MG1-MG2 LED indication is dark, the Ethernet Port is disabled, or a link is not detected.

Manual Controls and Switches

The ONT has only one user-operable control:

• Reset - This momentary pushbutton switch resets the ONT

The Reset switch pushbutton is accessible through a small hole on the back of the unit.

Specifications

The FlexSym ONT202 specifications are listed in the following table:

FlexSym ONT202 Specifications