STATisticS (stats)

Show statistics for a specified ONT or all ONTs on a PON.

Note: + = select one parameter from list

• Command Path -  ont>statistics
• Command - STATisticS  (stats)
• Actions - 
  • + ont-id= - AID of specific ONT 
    • MDS slot]-[PON port]-[ONT ID] (x-y-z)
  • + pon-id= - PON AID.
    • [MDS slot]-[PON port] (x-y)
  • verbose - Displays complete information of the ONT. 

1. From the ESUx> command line, input ont show pon-id=4-1-4, and press Enter. Output similar to the following is displayed:

   ESUx> ont stats ont-id=4-1-4 <enter> |==================================================| | ID : MDS1-4-1-4 | | | | General | | RX Optical Power : 0 | | TX Optical Power : 0 | | | | Near End | | TX Byte Count : 0 | | RX Byte Count : 0 | | TX Frame Count : 0 | | RX Frame Count : 0 | | RX BIP8 Error Count : 0 | | RX PLOAM Count : -1 | | RX BIP8 Error Rate : 0.0e+00 | | TX FCS Error Count : 0 | | TX Internal Error Count : 0 | | RX Miss Error Count : 0 | | RX TCS Error Count : 0 | | RX Internal Error Count : 0 | | TX Shaper Discard Count : 0 | | TX Broadcast Discard Count : 0 | | TX Internal Discard Count : 0 | | RX Flood Limit Discard Count : 0 | | RX Unauth Discard Count : 0 | | RX Access Violation Discard Count : 0 | | RX MAC Limit Discard Count : 0 | | RX VLAN Filter Discard Count : 0 | | RX Protocol Filter Discard Count : 0 | | RX Internal Discard Count : 0 | | RX Utilization : 0 | | TX Utilization : 0 | | RX Unicast Packets : 0 | | RX Unicast Btyes : 0 | | TX Unicast Packets : 0 | | TX Unicast Bytes : 0 | | TX Broadcast Packets : 0 | | TX Broadcast Bytes : 0 | | TX Multicast Packets : 0 | | TX Multicast Bytes : 0 | | TX Flooded Packets : 0 | | TX Flooded Bytes : 0 | | | | Far End | | RX BIP8 Error Count : 0 | | RX BIP8 Error Rate : 0.0e+00 | | | |==================================================| ESUx> _

Previous  |  Next