Status

Show the status for a specified ONT or all ONTs on a PON.

Note: + = select one parameter from list

• Command Path - ont>status
• Command - status 
• Actions - 
  • +all - all onts; or  
    • all-ids - show all onts ids
  • + card-id= - [MDS slot]
  • + ont-id= - MDS slot]-[PON port]-[ONT ID] (x-y-z)
  • + pon-id= - [MDS slot]-[PON port] (x-y)
  • Power over Ethernet - display 802.3at Power over Ethernet information
    • RF - display RF status information
      • +all - all onts
      • + ont-id= - MDS slot]-[PON port]-[ONT ID] (x-y-z)
      • + pon-id= - [MDS slot]-[PON port] (x-y)
  • RF - display RF status information 
    • +all - all onts
    • + ont-id= - MDS slot]-[PON port]-[ONT ID] (x-y-z)
    • + pon-id= - [MDS slot]-[PON port] (x-y)
  • verbose - Displays complete information of the ONT. 

1. From the ESUx> command line, input ont status pon-id=4-1, and press Enter. Output similar to the following is displayed:

   ESUx> ont status pon-id=4-1 <enter> | Equipment Status | |=============|============|================|=========|=========|============|=======|=======| | | | | Adm/Opr | | Installed | RxPwr | Pwr | | AID | User Label | Serial Number | State | Status | Type | (dBm) | State | |=============|============|================|=========|=========|============|=======|=======| | MDS1-4-1-1 | ONT705GR-1 | BILL00000033 | dis/dn | ESTOP | UNKNOWN | -1 | up | | MDS1-4-1-2 | ONT142R-1 | IPHO005191C9 | ena/up | ACTV | ONT142R | -21 | up | | MDS1-4-1-3 | ONT121-1 | IPHO0052A980 | ena/up | ACTV | ONT121WX | -22 | up | | MDS1-4-1-4 | ONT709GP-1 | SHGJ00001964 | ena/dn | OOS | UNKNOWN | -1 | up | | MDS1-4-1-5 | 140C | BFWS00059377 | ena/up | ACTV | ONT140 | -20 | up | | MDS1-4-1-9 | | TSLS00000000 | ena/dn | INACT | UNKNOWN | 0 | unkn | |=============|============|================|=========|=========|============|=======|=======| ESUx> _

Previous  |  Next