STP Configuration

stpconf

The stpconf command displays the Spanning Tree configuration for the network element and its up-link ports.

• Command - stpconf

1. From the ESUx> command Line, input stpconf, and press Enter. Output similar to the following is displayed:

   ESUx> stpconf <enter> STP Tree Configurations: CIST Bridge MDS1:0 Config ----------------------------------------------------------------------------------------- protocol version : 0 max age : 20 hello time : 2 forward delay : 15 priority : 53248 hold count : 6 max hops : 20 configuration rev : configuration name: 00:C0:9B:02:07:9E filter db aging time: 300 ---------------------------------------------------------------------------------------- CIST Port NET1:0 Config ------------------------------------------------------------------------------------- admin state : Unlocked path cost : 20000 priority : 128 hello time : 2 edge port : false point to point: auto restricted role: false restricted tcn: false ------------------------------------------------------------------------------------- CIST Port NET3:0 Config ------------------------------------------------------------------------------------- admin state : Unlocked path cost : 2000 priority : 128 hello time : 2 edge port : false point to point: auto restricted role: false restricted tcn: false ------------------------------------------------------------------------------------- ESUx> _

Previous