››

Trunk Configuration

trunkconf

The trunkconf command displays the link status and Link Aggregation Control Protocol (LACP) status of each port in the LAG.

Command - trunkconf

From the ESUx> line command, input trunkconf, and press Enter. Output similar to the following is displayed:

ESUx> trunkconf <enter>

| LAG Interface(s)                                                        |
|=========================================================================|
| LACP priority               : 32768                                     |
| Bridge Aging Period         : 300                                       |
| Bridge Mode                 : 802.1q                                    |
|                                                                         |
| LAG Interface Configuration                                             |
|   AID                       : LAG1                                      |
|   User Label                : default                                   |
|   Speed                     : AUTODETECT 1000                           |
|   MAC Pause                 : SYM                                       |
|                                                                         |
|   Port Defaults                                                         |
|     Default VLAN ID         : 1                                         |
|     Default Priority        : 0                                         |
|     Hashing                 : source-destination-mac                    |
|                                                                         |
|   Port ID(s)                                                            |
|     Port #1                 : MDS1-ESUA-1                               |
|     Port #2                 : MDS1-ESUB-1                               |
|                                                                         |
|   LACP                                                                  |
|     Admin State             : disabled                                  |
|     Mode                    : passive                                   |
|     Timer                   : short                                     |
|     Wait Timer              : 2                                         |
|                                                                         |
| LAG Interface Configuration                                             |
|   AID                       : LAG3                                      |
|   User Label                : Testing NET                               |
|   Speed                     : 10000 BASET                               |
|   MAC Pause                 : SYM                                       |
|                                                                         |
|   Port Defaults                                                         |
|     Default VLAN ID         : 1                                         |
|     Default Priority        : 0                                         |
|     Hashing                 : source-destination-mac                    |
|                                                                         |
|   Port ID(s)                                                            |
|     Port #1                 : MDS1-ESUA-6                               |
|     Port #2                 : MDS1-ESUB-6                               |
|                                                                         |
|   LACP                                                                  |
|     Admin State             : disabled                                  |
|     Mode                    : active                                    |
|     Timer                   : long                                      |
|     Wait Timer              : 2                                         |
|                                                                         |
|=========================================================================|

ESUx> _

FEEDBACK: Are you happy with this material?

Thank you Your feedback helps us to continually improve our content.

On this page

trunkconf