Viewing Port Link Properties

1. In the Common Tree, select the OLT, card, or remote shelf.
2. In the Application View Bar, click LAGs ().
3. In the LAGs window, click the GbE/NNI tab.
4. Select the desired port, right-click, and click Property in the pop-up menu.
    

   Figure 1: Selected GbE Line with Property Menu

   
    
5. In the GbE Port Property dialog, view the fields in the Status tab. See Table 1 for field descriptions.
    

   Figure 2: GbE Port Property - Status Tab

   
    

   Note: If the line state is Unknown, all fields below the Line Type are blank.

    

   Table 1: GbE Port Property Dialog - Status Tab

   Field	Description
   NE IP Address	The IP address for this network element.
   NE Target Identifier	The target identifier for this network element.
   AID	The access identifier (AID) for the selected line. For a description of AID formats, refer to Alarms and AIDs - Reference Tables.
   Port Type	The type of port (for example, ESU-Network, ESU-IO, etc.).
   User Label	User-defined label identifier that identifies the GbE port. Refer to Updating the GbE Port Identifier or the related procedure.
   Max Tx Unit	Maximum number of transmission units for the port (in bytes).
   Speed	The GbE line speed.
   GbE Line Operational State	The operational state for this GbE line. Values are: In Service - The OLT is reporting that the operational state is enabled. Not In Service - The OLT is reporting that the operational state is disabled. Unknown - The OLT has failed to report an operational state.
   Duplex	The line duplex configuration (always Full).
   MAC Address	The hardware media access control (MAC) address for the component.
   Availability State	Indicates the OLT availability status (Normal or Abnormal). If the status is abnormal, click the button to the right to display the GbE Availability State dialog with a list of the reported state values.
   Optical Connection Data
   Vendor Name	The vendor's name (displays up to 16 characters).
   Vendor PN	The vendor part number (displays up to 16 characters).
   Vendor Rev	The vendor revision number (displays up to 4 characters).
   Serial Number	The card serial number (displays up to 16 characters).
   Date Code	The date code (displays up to 8 characters).
   Wavelength	The line wavelength (in nm).
   Temperature	The optical operating temperature (range is -128 to 128).
   Voltage	The optical operating voltage (range is 0 to 6.55V).
   Tx Current	The optical transmit current (range is 0 to 131ma).
   Tx Optical Power (dBm)	The optical transmit power (in dBm).
   Rx Optical Power (dBm)	The optical receive power (dBm).
   Availability State	Indicates the optical connection data availability status (Normal, or Abnormal). If the status is abnormal, click the button to the right to display the OCD Availability State dialog with a list of the reported state values. Note: The Availability State of Not Equipped appears on the GbE Line Property Status tab when the OCD Availability State is Not Installed.

6. To update the displayed information, click the Refresh button.

   Note: The Status tab provides the option to enable or disable the GbE line. For the related procedure, refer to Enabling or Disabling ESU Uplinks.

   Note: The GbE Line Property dialog provides three additional tabs (Packet Counters, Traffic Analysis, and Error Counters). These tabs provide statistical information for the selected GbE line. For more information, refer to Viewing GbE Port Statistics.

       |    Next