Voice Gateway Turnup
Introduction
Purpose
This document provides information on how to commission a single shelf VGW running Release 15.2.4 or 16.x
Document Number
ENG-010467
Applies To
- T1000 Voice Gateway (VGW)
- 11xx OLT
- Panorama PON EMS
Assumptions
- User has been provided with a SuperUser password to access the Craft
- User has A Serial Cable Attached to the Front of the VGW shelf. Settings at 9600 Baud, 8, 1 None.
- User has a 27.1 or later version of the Tellabs 11xx Software package installed on their PON EMS and 11xx OLT.
- User has installed GBE222 in Slot 12 and Slot 13 of the VGW Shelf
- User has installed iGPE in Slot 21 and Slot 22 of each VGW Shelf that will have voice service on it..
VGW Turnup Procedure
Login to the VGW craft port.
Main Menu
1. Provisioning Menu
2. Maintenance Menu
3. Testing Menu
4. Traffic Menu
5. Administration Menu
6. Log Off
7. Turn-Up Voice Gateway
A. All Current Alarms
?. Help
Main Menu
MJ> [1]: 7
Turn-Up Voice Gateway
Management System [1191 Broadband EMS]: 1191 Broadband EMS
-------------------------------------------------------------------------------
Location: LET-1-20 Plug-In: IPMI-3
Primary Gateway Address : 000.000.000.000
Agent IP Address : 000.000.000.000
Agent Subnet Mask : 255.255.255.000
Edit this card? [No]: y
Primary Gateway Address [000.000.000.000]: 172.28.125.1
Agent IP Address [000.000.000.000]: 172.28.125.106
Agent Subnet Mask [255.255.255.000]: 255.255.255.000
Ethernet Access [Back]: Front
Effect Changes? [No]: y
Main Menu
MJ> [7]:
<Date> AccessMAX LET - TURNUP 16:30:09
Main Menu
1. Provisioning Menu
2. Maintenance Menu
3. Testing Menu
4. Traffic Menu
5. Administration Menu
6. Log Off
7. Turn-Up Voice Gateway
A. All Current Alarms
?. Help
Main Menu
MJ> [1]: 1
<Date> AccessMAX LET - TURNUP 16:30:12
Provisioning Menu
1. System Provisioning Menu
2. TR-8 Provisioning Menu
3. GR-303 Provisioning Menu
4. Cross-Connect Provisioning Menu
5. Transceiver Provisioning Menu
6. DCS Provisioning Menu
7. Special Circuits Provisioning Menu
8. Metallic Test Provisioning Menu
10. Management Interfaces Provisioning Menu
12. Timing Provisioning Menu
13. ATM Provisioning Menu
14. IMA Provisioning Menu
16. PON Provisioning Menu
17. Ethernet Provisioning Menu
A. All Current Alarms
B. Main Menu
*. Main Menu
?. Help
Provisioning Menu
MJ>> [1]: 5
<Date> AccessMAX LET - TURNUP 16:30:17
Transceiver Provisioning Menu
1. List Transceiver Settings
2. Modify Transceiver Settings
3. List Alarm Thresholds
4. Modify Alarm Thresholds
5. List DS3 Transceiver Default
6. Set DS3 Transceiver Default
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
Transceiver Provisioning Menu
MJ>>> [1]: 2
Modify Transceiver Settings
Enter Plug-In Type [All]: GBE222
Enter Starting Plug-In Location [LET-1-1]: LET-1-12
Enter Ending Plug-In Location [LET-8-PSUB]: LET-8-PSUB
-------------------------------------------------------------------------------
Location: LET-1-12 Plug-In: GbE222 Status: Out of Service
Service: None
Transceiver: Enabled
Service: Transport
Single Card Transport: Enabled
Transceiver Port 1: Enabled
Transceiver Port 2: Enabled
Receive Flow Control Port 1: Enabled
Receive Flow Control Port 2: Enabled
Auto-Negotiation Port 1: Enabled
Auto-Negotiation Port 2: Enabled
Edit this card? [No]: y
Service [Transport]: Uplink
Transceiver Port 1 [Enabled]: Enabled
Transceiver Port 2 [Enabled]: Disabled
Auto-Negotiation Port 1 [Enabled]: Enabled
Auto-Negotiation Port 2 [Enabled]: Enabled
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
-------------------------------------------------------------------------------
Location: LET-1-13 Plug-In: GbE222 Status: Out of Service
Service: None
Transceiver: Enabled
Service: Transport
Single Card Transport: Disabled
Transceiver Port 1: Enabled
Transceiver Port 2: Enabled
Receive Flow Control Port 1: Enabled
Receive Flow Control Port 2: Enabled
Auto-Negotiation Port 1: Enabled
Auto-Negotiation Port 2: Enabled
Edit this card? [No]: y
Service [Transport]: Uplink
Transceiver Port 1 [Enabled]: Enabled
Transceiver Port 2 [Enabled]: Disabled
Auto-Negotiation Port 1 [Enabled]: Enabled
Auto-Negotiation Port 2 [Enabled]: Enabled
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
Note: Alarms may be reported here. Ignore
Transceiver Provisioning Menu
MJ>>> [2]:
Hit <ESC> until the Provisioning menu below appears
Configure GBE222
System Provisioning Menu
<Date> AccessMAX LET - TURNUP 16:31:53
Provisioning Menu
1. System Provisioning Menu
2. TR-8 Provisioning Menu
3. GR-303 Provisioning Menu
4. Cross-Connect Provisioning Menu
5. Transceiver Provisioning Menu
6. DCS Provisioning Menu
7. Special Circuits Provisioning Menu
8. Metallic Test Provisioning Menu
10. Management Interfaces Provisioning Menu
12. Timing Provisioning Menu
13. ATM Provisioning Menu
14. IMA Provisioning Menu
16. PON Provisioning Menu
17. Ethernet Provisioning Menu
A. All Current Alarms
B. Main Menu
*. Main Menu
?. Help
MJ>> [1]: 13
<Date> AccessMAX LET - TURNUP 16:32:23
ATM Provisioning Menu
1. List ATM Virtual Connections
2. Modify ATM Virtual Connections
3. Delete ATM Virtual Connections
4. List Blocked Virtual Connections
5. List ATM Virtual Connection Status
7. Connection Admission Control Provisioning Menu
8. List ATM Traffic Profiles
9. Modify ATM Traffic Profiles
10. Protection Group Provisioning Menu
11. List Terminal ATM Mode
12. Set Terminal ATM Mode
13. TDM over ATM Provisioning Menu
14. ATM Queue Allocation Menu
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
ATM Provisioning Menu
MJ>>> [1]: 10
<Date> AccessMAX LET - TURNUP 16:32:30
Protection Group Provisioning Menu
1. List Protection Groups
2. Modify Protection Groups
3. Delete Protection Groups
A. All Current Alarms
B. ATM Provisioning Menu
*. Main Menu
?. Help
Protection Group Provisioning Menu
MJ>>>> [1]: 2
Modify Protection Groups
Enter Terminal Location [LET]: LET
Enter ATM Protection Group Number [1]: 1
Enter Primary Plug-In Location [LET-1-1]: LET-1-12
Enter Plug-In Type [PON]: GBE222
Provision Secondary Card? [No]: y
Enter Secondary Plug-In Location [LET-1-1]: LET-1-13
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
Protection Group Provisioning Menu
MJ>>>> [2]:
<Date> AccessMAX LET - TURNUP 16:33:04
ATM Provisioning Menu
1. List ATM Virtual Connections
2. Modify ATM Virtual Connections
3. Delete ATM Virtual Connections
4. List Blocked Virtual Connections
5. List ATM Virtual Connection Status
7. Connection Admission Control Provisioning Menu
8. List ATM Traffic Profiles
9. Modify ATM Traffic Profiles
10. Protection Group Provisioning Menu
11. List Terminal ATM Mode
12. Set Terminal ATM Mode
13. TDM over ATM Provisioning Menu
14. ATM Queue Allocation Menu
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
ATM Provisioning Menu
MJ>>> [10]:
Hit <ESC> key until you get back to the menu below
<Date> AccessMAX LET - TURNUP 16:33:07
Provisioning Menu
1. System Provisioning Menu
2. TR-8 Provisioning Menu
3. GR-303 Provisioning Menu
4. Cross-Connect Provisioning Menu
5. Transceiver Provisioning Menu
6. DCS Provisioning Menu
7. Special Circuits Provisioning Menu
8. Metallic Test Provisioning Menu
10. Management Interfaces Provisioning Menu
12. Timing Provisioning Menu
13. ATM Provisioning Menu
14. IMA Provisioning Menu
16. PON Provisioning Menu
17. Ethernet Provisioning Menu
A. All Current Alarms
B. Main Menu
*. Main Menu
?. Help
Provisioning Menu
MJ>> [13]: 5
<Date> AccessMAX LET - TURNUP 16:33:11
Transceiver Provisioning Menu
1. List Transceiver Settings
2. Modify Transceiver Settings
3. List Alarm Thresholds
4. Modify Alarm Thresholds
5. List DS3 Transceiver Default
6. Set DS3 Transceiver Default
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
Transceiver Provisioning Menu
MJ>>> [1]: 2
Modify Transceiver Settings
Enter Plug-In Type [All]: GBE222
Enter Starting Plug-In Location [LET-1-1]: LET-1-12
Enter Ending Plug-In Location [LET-8-PSUB]: LET-8-PSUB
-------------------------------------------------------------------------------
Location: LET-1-12 Plug-In: GbE222 Status: Out of Service
Service: None
Transceiver: Enabled
Service: Uplink
Transceiver Port 1: Enabled
Transceiver Port 2: Disabled
Receive Flow Control Port 1: Enabled
Receive Flow Control Port 2: Enabled
Auto-Negotiation Port 1: Enabled
Auto-Negotiation Port 2: Enabled
Edit this card? [No]: y
Transceiver [Enabled]: Enabled
Service [Uplink]: Uplink
Transceiver Port 1 [Enabled]: Enabled
Transceiver Port 2 [Disabled]: Enabled
Auto-Negotiation Port 1 [Enabled]: Enabled
Auto-Negotiation Port 2 [Enabled]: Enabled
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
-------------------------------------------------------------------------------
Location: LET-1-13 Plug-In: GbE222 Status: Out of Service
Service: None
Transceiver: Enabled
Service: Uplink
Transceiver Port 1: Enabled
Transceiver Port 2: Disabled
Receive Flow Control Port 1: Enabled
Receive Flow Control Port 2: Enabled
Auto-Negotiation Port 1: Enabled
Auto-Negotiation Port 2: Enabled
Edit this card? [No]: y
Transceiver [Enabled]: Enabled
Service [Uplink]: Uplink
Transceiver Port 1 [Enabled]: Enabled
Transceiver Port 2 [Disabled]: Enabled
Auto-Negotiation Port 1 [Enabled]: Enabled
Auto-Negotiation Port 2 [Enabled]: Enabled
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
Note: Alarms may scroll out here. Ignore
Access the PON EMS, Add the VGW and supply the IP. Verify that the VGW is added to PON EMS and no Errors are reported.
Hit <ESC> or login if necessary until the Main menu is displayed.
Configure iGPE
<Date> AccessMAX LET - VGW-LAB 16:59:03
Main Menu
1. Provisioning Menu
2. Maintenance Menu
3. Testing Menu
4. Traffic Menu
5. Administration Menu
6. Log Off
7. Turn-Up Voice Gateway
A. All Current Alarms
?. Help
Main Menu
CR> [1]: 1
<Date> AccessMAX LET - VGW-LAB 17:04:20
Provisioning Menu
1. System Provisioning Menu
2. TR-8 Provisioning Menu
3. GR-303 Provisioning Menu
4. Cross-Connect Provisioning Menu
5. Transceiver Provisioning Menu
6. DCS Provisioning Menu
7. Special Circuits Provisioning Menu
8. Metallic Test Provisioning Menu
10. Management Interfaces Provisioning Menu
12. Timing Provisioning Menu
13. ATM Provisioning Menu
14. IMA Provisioning Menu
16. PON Provisioning Menu
17. Ethernet Provisioning Menu
A. All Current Alarms
B. Main Menu
*. Main Menu
?. Help
Provisioning Menu
CR>> [1]: 13
<Date> AccessMAX LET - VGW-LAB 17:05:05
ATM Provisioning Menu
1. List ATM Virtual Connections
2. Modify ATM Virtual Connections
3. Delete ATM Virtual Connections
4. List Blocked Virtual Connections
5. List ATM Virtual Connection Status
7. Connection Admission Control Provisioning Menu
8. List ATM Traffic Profiles
9. Modify ATM Traffic Profiles
10. Protection Group Provisioning Menu
11. List Terminal ATM Mode
12. Set Terminal ATM Mode
13. TDM over ATM Provisioning Menu
14. ATM Queue Allocation Menu
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
ATM Provisioning Menu
CR>>> [1]: 10
<Date> AccessMAX LET - VGW-LAB 17:05:19
Protection Group Provisioning Menu
1. List Protection Groups
2. Modify Protection Groups
3. Delete Protection Groups
A. All Current Alarms
B. ATM Provisioning Menu
*. Main Menu
?. Help
Protection Group Provisioning Menu
CR>>>> [1]: 2
Modify Protection Groups
Enter Terminal Location [LET]: LET
Enter ATM Protection Group Number [1]: 2
Enter Primary Plug-In Location [LET-1-1]: LET-1-21
Enter Plug-In Type [PON]: iGPE
Associated Uplink Protection Group [1]: 1
For the inputs below, use the appropriate VLAN and IP addresses for your network. If the VGW will be directly physically connected, then the IP parameters below are OK.
VLAN ID [0]: 15
VLAN Priority [0]: 6
IP Address [000.000.000.000]: 10.10.10.10
Default Router [000.000.000.000]: 10.10.10.1
Subnet Mask [255.255.255.000]: 255.255.255.000
SIP UDP Port [5060]: 5060
Provision Secondary Card? [No]: y
Enter Secondary Plug-In Location [LET-1-1]: LET-1-22
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
Protection Group Provisioning Menu
CR>>>> [2]:
<Date> AccessMAX LET - VGW-LAB 17:09:33
ATM Provisioning Menu
1. List ATM Virtual Connections
2. Modify ATM Virtual Connections
3. Delete ATM Virtual Connections
4. List Blocked Virtual Connections
5. List ATM Virtual Connection Status
7. Connection Admission Control Provisioning Menu
8. List ATM Traffic Profiles
9. Modify ATM Traffic Profiles
10. Protection Group Provisioning Menu
11. List Terminal ATM Mode
12. Set Terminal ATM Mode
13. TDM over ATM Provisioning Menu
14. ATM Queue Allocation Menu
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
ATM Provisioning Menu
CR>>> [10]:
Access the PON EMS, Select the TID of the VGW on the Browser Tree and select the "SYNC" Operation. Verify that no Errors are reported.
Hit <ESC> until the Provisioning menu is displayed
Configure LAG
<Date> AccessMAX LET - VGW-LAB 17:09:35
Provisioning Menu
1. System Provisioning Menu
2. TR-8 Provisioning Menu
3. GR-303 Provisioning Menu
4. Cross-Connect Provisioning Menu
5. Transceiver Provisioning Menu
6. DCS Provisioning Menu
7. Special Circuits Provisioning Menu
8. Metallic Test Provisioning Menu
10. Management Interfaces Provisioning Menu
12. Timing Provisioning Menu
13. ATM Provisioning Menu
14. IMA Provisioning Menu
16. PON Provisioning Menu
17. Ethernet Provisioning Menu
A. All Current Alarms
B. Main Menu
*. Main Menu
?. Help
Provisioning Menu
CR>> [13]: 17
<Date> AccessMAX LET - VGW-LAB 17:09:39
Ethernet Provisioning Menu
1. AEC/EAC/EEC Provisioning Menu
2. MAC Address Menu
3. IP Address Menu
4. LAG Provisioning Menu
5. Traffic Management Rule Menu
6. Ethernet Scheduling Menu
7. ATM Traffic Class to 802.1p Mapping Menu
8. CoS Queue Mapping Menu
9. Packet Traffic Descriptor Menu
10. Broadcast and Multicast Control Menu
11. List WRED Congestion Profiles
12. EtherType Provisioning Menu
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
Ethernet Provisioning Menu
CR>>> [1]: 4
<Date> AccessMAX LET - VGW-LAB 17:09:43
LAG Provisioning Menu
1. List Link Aggregation Parameters
2. Modify Link Aggregation Parameters
3. List LACP System Parameters
4. Modify LACP System Parameters
5. List LACP Port Parameters
6. Modify LACP Port Parameters
A. All Current Alarms
B. Ethernet Provisioning Menu
*. Main Menu
?. Help
LAG Provisioning Menu
CR>>>> [1]: 2
Modify Link Aggregation Parameters
Enter Terminal Location [LET]: LET
Enter Protection Group [1]: 1
Enter Hash Algorithm [Source plus Destination MAC]: Source plus Destination MAC
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
LAG Provisioning Menu
CR>>>> [2]:
<Date> AccessMAX LET - VGW-LAB 17:10:32
Ethernet Provisioning Menu
1. AEC/EAC/EEC Provisioning Menu
2. MAC Address Menu
3. IP Address Menu
4. LAG Provisioning Menu
5. Traffic Management Rule Menu
6. Ethernet Scheduling Menu
7. ATM Traffic Class to 802.1p Mapping Menu
8. CoS Queue Mapping Menu
9. Packet Traffic Descriptor Menu
10. Broadcast and Multicast Control Menu
11. List WRED Congestion Profiles
12. EtherType Provisioning Menu
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
Ethernet Provisioning Menu
CR>>> [4]:
Access the PON EMS, Select the TID of the VGW on the Browser Tree and select the "SYNC" Operation. Verify that no Errors are reported.
Hit <ESC> until the Main menu is displayed
<Date> AccessMAX LET - VGW-LAB 17:10:50
Main Menu
1. Provisioning Menu
2. Maintenance Menu
3. Testing Menu
4. Traffic Menu
5. Administration Menu
6. Log Off
7. Turn-Up Voice Gateway
A. All Current Alarms
?. Help
Main Menu
CR> [1]: 1
<Date> AccessMAX LET - VGW-LAB 17:10:58
Provisioning Menu
1. System Provisioning Menu
2. TR-8 Provisioning Menu
3. GR-303 Provisioning Menu
4. Cross-Connect Provisioning Menu
5. Transceiver Provisioning Menu
6. DCS Provisioning Menu
7. Special Circuits Provisioning Menu
8. Metallic Test Provisioning Menu
10. Management Interfaces Provisioning Menu
12. Timing Provisioning Menu
13. ATM Provisioning Menu
14. IMA Provisioning Menu
16. PON Provisioning Menu
17. Ethernet Provisioning Menu
A. All Current Alarms
B. Main Menu
*. Main Menu
?. Help
Provisioning Menu
CR>> [1]: 13
<Date> AccessMAX LET - VGW-LAB 17:11:19
ATM Provisioning Menu
1. List ATM Virtual Connections
2. Modify ATM Virtual Connections
3. Delete ATM Virtual Connections
4. List Blocked Virtual Connections
5. List ATM Virtual Connection Status
7. Connection Admission Control Provisioning Menu
8. List ATM Traffic Profiles
9. Modify ATM Traffic Profiles
10. Protection Group Provisioning Menu
11. List Terminal ATM Mode
12. Set Terminal ATM Mode
13. TDM over ATM Provisioning Menu
14. ATM Queue Allocation Menu
A. All Current Alarms
B. Provisioning Menu
*. Main Menu
?. Help
ATM Provisioning Menu
CR>>> [1]: 12
Set Terminal ATM Mode
Enter Terminal Location [LET]: LET
Enter Terminal ATM Mode [ATM Over TDM]: Broadband Enabled
WARNING - Action May Be Service Affecting.
Effect Changes? [No]: y
ATM Provisioning Menu
CR>>> [12]:
Access the PON EMS, Select the TID of the VGW on the Browser Tree and select the "SYNC" Operation. Verify that no Errors are reported
Provision Voice Service via PON EMSThe remainder of the steps below are also performed on the PON EMS GUI
Create GR303 interface Group
Select the "CMS Shelf" associated with the VGW and select the Links View on the Browser
From the Dropdown, Select "Create GR303 Group"
Instruct PON EMS on DLP and T1 Card Locations
Assuming two T1 Cards in slot 1 and Slot 2
Assuming two DLP Cards in Slot 3 and Slot 4
Provision the ONT Voice parameters:
Assign VoIP Parameters to ONT
Note: The network assigned to the ONT must be reachable from the network IP of the iGPE that was provisioned earlier in this section.
If the VGW is connected to the OLT directly, the Gateway IP provided on the ONT should be the IP of the iGPE
Create a GR303 Voice CrossConnect.
Select the ONT;
Select "Connections View"
Select "Voice" tab
Then create per below
Service should now be available on the card.