Clone

Use the following procedure to Clone Call Features Profile:

1. Select the Call Features tab, select the Profile Name to clone and click the Clone a Current Profile () icon in the Main Menu bar. The Create Call Features Profile dialog is displayed.
2. The fields in the Create Call Features profile dialog are the same as those of the selected profile.
   
   
    
3. Enter a Profile Name for this profile, then set the profile values In the Create Call Features Profile dialog.

   Note: For a description of each profile attribute and valid entry values, refer to the Create section table.

4. When all the fields have been filled in, click on the Apply button. 
5. The Create Call Features Profile dialog remains open. If no additional profiles are to be cloned, click the Cancel button. 
6. If no further profiles are to be accessed, click on the Close button to exit the TConfig display dialog.

Previous   |   Next