Create

Provides options to create Remote Authentication Dial-In User Service (RADIUS) profiles.

Note: * = required parameter, + = select one parameter from list

• Command Path - profile>radius>create>
• Actions -
  • create - Create a new RADIUS profile
    • * name= - Name of new RADIUS profile
    • radius-config - Radius Server config information
      • + host= - RADIUS Server Hostname
      • + ip - RADIUS IP Address (IPv4 (any) or iPv6 (any))
        • key - shared key
          • radius - config.host or radius-config.ip
             
        • redundancy-mode - redundancy mode
          • fail-over (default)|round-robin

Create a new Radius Profile

1. From the ESUx> command line, input profile radius create name=CLITest  and press Enter. Output similar to the following is displayed:

   ESUx> profile radius create name=CLITest <enter> success ESUx> _

Validate Entry

1. From the ESUx> command line, input profile radius show and press Enter. Output similar to the following is displayed:

   ESUx> profile radius show <enter> | RADIUS Profile | |==================================|====|======================|====================================| | | | | Config #1 - Summary | | |Red | | | Admin | | | Profile Name |Mode| Source MAC(s) | Server | State | Port | |==================================|====|======================|====================================| | login-default | FO | 00:c0:9b/24 | n/a | n/a | n/a | | CLITest | FO | n/a | n/a | n/a | n/a | | DMW-Radius-STC | FO | 00:04:00:00:00:00/16 | 172.28.6.99 | disabled | 1812 | | DMW-lnxdtapp09-RadiusServer | FO | n/a | 172.28.6.99 | enabled | 1812 | | TELLABS-CLEARPASS | FO | n/a | 172.28.6.82 | disabled | 1812 | |==================================|====|======================|====================================| ESUx> _

Previous   |   Next