Create

Provides options to create service (svc) profiles.

Note: * = required parameter, + select one parameter from set

• Command Path - profile>svc
• Object - svc
• Actions -
  • create - Create a new svc profile
    • * name= - Name of new svc profile
    • acl-profile= - ACL Profile name
      • Select from list of ACL profiles
    • Circuit-ID-template (cid)= - Format for reporting Circuit ID in DHCP Option 82, PPPoE, and RADIUS NAS-Port-ID
      • %TID% eth %SHELF%/%SLOT%/%PON%/%ONT%/1/%PORT% (all default)
    • Class-Of-Service (cos) - Upstream Class of Service
      • marking-MODE= - Select behavior of selecting 802.1p value for received frames
        • static (default) | copy | dcsp-mapped
      • pbit-priority= - 802.1p value for STATIC and fallback pbit-modes
        • pbit-0 (default)|pbit-1|pbit-2|pbit-3|pbit-4|pbit-5|pbit-6|pbit-7
    • DowNstream (dn)= - Downstream
      • encryption= - Enable encryption on link
        • enabled (default) | disabled
      • shaping - Downstream shaping
        • mode= - Enable shaping for all 802.1p values on the Service's VLAN or on a single 802.1p value for received frames
          • vlan|pbit-0 (default)|pbit-1|pbit-2|pbit-3|pbit-4|pbit-5|pbit-6|pbit-7
        • Peak-Information-Rate (pir)=  - In kbps
          • 0-10000000 (default 1000192)
        • Sustained-Information-Rate (sir)=  - In kbps
          • 0-10000000 (default 5120)
    • LLDP-network-policy - LLDP Network Policy information
      • Application (appl)= - Configure the network policy application type for LLDP
        • data=0, voice=1, voice-signaling=2, guest-voice=3, guest-voice-signaling=4, softphone-voice=5, video-conferencing=6, streaming-video=7, video-signaling=8
    • Network-Vlan (nv)= - Network VLAN
      • 1-4094|Non-Forwarding
    • Remote-ID-template (rid)= - Format for reporting Remote ID in DHCP Option 82
      • %TID% (default)
    • service-CLASS= - Traffic Class
      • %TID%
    • service-PROTocol= - Configure allowed Ethertypes on the Service
      • ipoe|transparent (default)
    • service-TYPE= - Forwarding Behavior
      • iptv|bridged-n:n (default)|bridged-n:n-iptv|vlan-trunk|vlan-trunk-iptv
    • +Subscriber-Vlan= - Subscriber VLAN
      • Tagged|untagged|Priority-TAGged
    • UPstream (up)= - Upstream
      • + CLass-based
        • Peak-Information-Rate= - In kbps
          • 0-10000000
        • Sustained-Information-Rate= - In kbps
      • + Rate-Priority-based
        • Addl-bw-Eligibility=
          • None|NonAssured|BestEffort
        • ASSured-bw= - In kbps
          • 0-10000000
        • FiXed-bw= - In kbps
          • 0-10000000
        • MAXimum-bw= - In kbps
          • 0-10000000
        • PRIority=
          •  1(high) - 8(low)
        • WeiGhT=  
          • 1 - 100

1. From the ESUx> command line, input profile svc create name=TellabscliTest subscriber-Vlan=untagged Network-Vlan=203, and press Enter. Output similar to the following is displayed:

   ESUx> profile svc create name=TellabsCliTest subscriber-Vlan=untagged Network-Vlan=203 <enter> success ESUx> _

Previous  |  Next