Custom Installation

1. The Enable Secured Connection Between EMS Client and Server dialog is displayed.
   
   
    
2. If a Secured Connection solution is required (recommended), check Secured Connection. If not, leave it unchecked and click on the Next button.
3. The Specify Server Host dialog is displayed.
   
   
   
   
    
4. In the Server Host field, type the IP address or the name of the Panorama PON EMS Server that will host this client.
5. In the Server Port field, enter the Port address or accept the Default and click on the Next button.
6. The Choose Install Folder dialog is displayed.
   
   
   
   
    
7. The default installation location is C:TellabsPanoramaPON_xxx (recommended).
8. Click on the next button to accept the default location and folder or click Choose to navigate to another pathfolder as needed.
9. The Pre-Installation Summary screen is displayed.
   
   
   
   
    
10. In the Pre-Installation Summary screen, review the installation settings, and confirm the settings are correct.

• If the summary information is correct, click on the Install button.
• If the summary information is not correct, click on the Previous button and correct the settings.

11. The Installing Tellabs panorama PON screen is displayed.
    
    
    
    
     
12. When the installation is complete, the Install Complete dialog is displayed.
    
    
    
    
     
13. To finish the installation, click on the Done button.
14. Go to Starting and Stopping the Client. 

Previous   |   Next