Edit

1. Select the Profile Name from the Profile/Template List to edit and click the Edit a Current Profile () icon in the Main Menu bar or right-click the profile name and use the pop-up menu to select Edit. The Edit ACL Profile dialog is displayed.
   
     

2. To edit an existing profile, click on a Profile Name in the Profile Names window and click on the Edit a current profile icon.
3. Select the EMS ACL Create a New Profile icon and name the ACL profile to <name>. Output similar to the following is displayed: 
   
   
    
4. Click on the Create Rule button and perform the following steps:
   
   
    

Step 1: Enter <e.g. Rule 1> in Rule Name entry box:

Step 2: Select <e.g. Basic ACL> from the ACL Type Dropdown

Step 3: Select <e.g. Permit> from the Action Dropdown

Step 4: Select <e.g.  Sticky Mac> from the SourceMAC(s) dropdown

Step 5: Click on the Add button to add the Source MAC to the source window

Step 6: Select the <e.g.  Sticky Mac> entry in the Source Window  

Step 7: Enter <e.g. 1> in the Max MAC(s) entry box

Step 8: Click on the Save button to save the rule profile

6. Click on the Apply button in the Create ACL Profile window to add the ACL profile to the Profile Name window list.
   
   
    
7. After the Profile has been generated, the ACL status is displayed.  Click on the Close button to complete the ACL profile.
   
   
    
8. If additional ACL Rules are added to this ACL Profile, start at Step 3 to repeat this same procedure.
9. If no other ACL Rules will be created for this ACL Profile, click the Cancel button. The new ACL Profile with the chosen attributes is displayed.

Previous  |   Next