Download the PDF 
ONT140W Install Guide for Bosch NDA-U-PAx Enclosure
Introduction
Document Number
ENG-010646
Revision History
| Revision | Description |
|---|---|
| Rev A (Dec 2020) | Initial draft of installation guide for 140W in Bosch NDA-U-PA0. |
| Rev B (Jan 2021) |
|
Related Documentation
Refer to the following publications for related information.
|
Tellabs Product (System) |
Document Name and Number |
|---|---|
| Tellabs 1100 Series | Tellabs 1100 Series Optical LAN Managing the PON User’s Guide |
| Tellabs 1100 Series Optical LAN Craft User Interface Guide | |
| Panorama PON | Panorama PON Installation and System Administrator User’s Guide. Panorama PON Element Management System Web Client User’s Guide |
ONT140W in Bosch NDA-U-PAx Application
Application Description
The ONT140W is a standard Tellabs GPON ONT that, when combined with the Installation Kit and the Bosch NDA-U-PAx Surveillance Cabinet, provides an extended temperature range -10C to +50C, an outdoor cabinet suitable for use with cameras that support mounting on the Bosch Surveillance cabinet.
All models of the Bosch NDA-U-PA0/PA1/PA2 are supported, but in all cases, the installed hardware will be removed during install so the PA0 is recommended for best economics as it has no installed power supply.
- Read this manual, in its entirety, prior to installing the device.
- Observe all warnings and cautions mentioned in this manual.
- Keep the device dry, ventilated, and clean.
- During severe weather conditions, unplug all electrical connections to the device to protect against lightning surges.
- Keep the ventilation openings clean to ensure proper airflow and prolong the life of the device. Do not place objects on the device that might block airflow and lead to overheating.
- ONTs should not be opened. There are no user-serviceable parts on the device.