Note: * = required parameter

• Command Path - interface>net>edit
• Object - net
• Action - edit
  • aid= - aid of net to EDIT ( List of current networks (i.e.  NET1..NET12)
  • dscp-profile= - DSCP Mapping Profile name
    • DSCP_Downstream-tmp|DSCP_Upstream-tmp|G-ONT_QoS_DSCP-Down|G-ONT_QoS_DSCP-Up|GW-16DSCP|GW-JITC-QoS|GW-QoS-DSCP-Down|SJ-DSCP|default|tsw_dscp
  • hash= - Hashing Algorithm
    • source-mac|destination-mac|**source-destination-mac**|source-ip|destination-ip|source-destination-ip
  • mac-pause= - mac pause type for this net interface
    • aid|dscp-profile|hash|port|Port-VlanID|Port-VlanPRIority|user-LABEL
  • port-aid= - aid of port to add to the net
    • List of ports (i.e. MDS1-ESUA-1|MDS1-ESUA-2|MDS1-ESUA-3|MDS1-ESUA-4|MDS1-ESUA-5|MDS1-ESUA-6|MDS1-ESUB-1|MDS1-ESUB-2|MDS1-ESUB-3|MDS1-ESUB-4|MDS1-ESUB-5|MDS1-ESUB-6)
  • auto-enable-port= - automatically enable port administrative state when adding to net
  • auto-disable-port= - automatically disable port administrative state before removing from 
  • Port-VlanID= - pvid for this net
    • 1-4094 (default 1)
  • Port-VlanPRIority= - priority for the pvid
    • 0-7 (default 0)
  • user-LABEL= - update vlan user label
    • any alpha-numeric name. (up to 32 characters)

1. From the ESUx> command line, input interface net edit auto-enable aid=net5, and press Enter. Output similar to the following is displayed:

   ESUx> interface net edit auto-enable aid=net5 <enter> success ESUx _

Previous   |   Next