Edit

Edit a Link Layer Discovery Protocol (LLDP) profile.

Note: * = required parameter, + = select one parameter from list

• Command Path - profile>lldp
• Object - lldp
• Actions -
  • edit - edit a LLDP profile
    • * name= - Name of LLDP  profile
    • admin=  - set administrative state for LLDP on the port
      • disabled|tx-only|rx-only|enabled
    • ieee-8021-tlvs  - IEEE 802.1 TLVs
      • port-vlan-id=  - enables advertisement of Port VLAN ID (PVID)
        • enabled (default) | disabled
      • vlan-name=  - enables advertisement of VLAN Name
        • enabled* | disabled
    • ieee-8023-tlvs  - IEEE 802.3 TLVs
      • mac-phy=  - enables advertisement of MAC/PHY Configuration/Status
        • enabled (default) | disabled
      • maximum-frame-size= -  enables advertisement of Maximum Frame Size (MTU)
        • enabled (default) | disabled
      • power-via-mdi=  -  enables advertisement of Power Via MDI
        • enabled (default) | disabled
    • lldp-med-parameters  - LLDP-MED Parameters
      • lldp-med-location  - LLDP-MED Location Parameters
        • location-source  - Where location data is provisioned (See Table 1)
          • + Access-IDentifier=  - Location string is AID of port (See Table 1)
          • + med-LOCATION=  - Location string is from port configuration (See Table 1)
          • med-TEMPLATE=  - Location string is from location-template in LLDP profile (See Table 1)
          • + user-LABEL=  - Location string is user label of port (See Table 2)
        • location-template  - Format to specify MED System Location TLV
          • + Civic-Address=  - Civic Address location format (See Table 3)
          • + elin=  - ELIN type location format
            • 1-25 character alpha-numeric string
        • location-type=  - Location type
          • civic-address | elin
    • lldp-med-tlvs  - LLDP-MED TLVs
      • extended-pse=  - enables advertisement of Extended Power-via-MDI (PSE)
        • enabled* | disabled
      • inventory=  - enables advertisement of Inventory
        • enabled (default) | disabled
      • lldp-med-capabilities=  - enables advertisement of LLDP-MED Capabilities
        • enabled (default) | disabled
      • location-identification=  -  enables advertisement of Location Identification
        • enabled (default)|disabled
      • network-policy=  - enables advertisement of Network Policy
        • enabled (default) | disabled
    • notification  - Notification
      • lldp-med-notifications  =- enables LLDP-MED notifications
        • enabled (default) | disabled
      • notifications=  - enables LLDP-style notifications
        • enabled (default) | disabled 
    • standard-parameters  - Standard Parameters
      • chassis-id-source  =- Chassis ID Source
        • ont (default) | userlabel-ifname | port-label | mac-address | ip-address | port-aid
      • port-id-source=  - Port ID Source
        • aid-ifname (default) | userlabel-ifalias | circuitid-tempate | ont-label|mac-address|ip-address|xcn-cid
      • port-id-template  - Format to specify Port ID Template
        • See Table 1
    • standard-tlvs  - Standard TLVs
      • port-description=  - enables advertisement of Port-Description
        • enabled (default) | disabled
      • system-capabilities=  - enables advertisement of System-Capabilities
        • enabled (default) | disabled
      • system-description=  - enables advertisement of System-Description
        • enabled (default) | disabled
      • system-name=  - enables advertisement of System-Name
        • enabled (default) | disabled
    • Vlan-Assignment-Delay  - delay access to untagged vlan when tagged vlans are assigned via network policy
      • Delay-Time=  - time in seconds to delay untagged vlan access
        • 60-300
      • Delay-Untagged-Access= - delay untagged vlan access
        • enabled (default) | disabled
           

1. From the ESUx> command line, input profile lldp edit name=LLDP_Wireless, and press Enter. Output similar to the following is displayed:

   ESUx> profile lldp create name=LLDP_Wireless lldp-med-parameters lldp-med-location location-type=civic-address <enter> success ESUx> _

Previous  | Next