Show

Display (show) the parameters for a specific LLDP profile or a display of all LLDP profiles.

Note: * = required parameter

• Command Path - profile>lldp
• Object - lldp
• Actions -
  • show - a LLDP profile
    • * name= - Name of LLDP profile
    • summary  - display consolidated summary results of each profile
    • verbose - display complete information per profile

LLDP Show Summary

1. From the ESUx> command line, input profile lldp show name=LLDP_Wireless, and press Enter. Output similar to the following is displayed:

   ESUx> profile lldp show name=LLDP_Wireless <enter> | Link Layer Discovery Protocol Profile | |================================================================| | Profile Name : LLDP_Wireless | | Admin State : enabled | | | | Standard TLVs | | Chassis ID : enabled | | Port ID : enabled | | Time to Live (TTL) : enabled | | Port Description : enabled | | System Name : enabled | | System Description : enabled | | System Capabilities : disabled | | Management Address : disabled | | | | IEEE 802.1 TLVs | | Port VLAN ID (PVID) : enabled | | Port and Protocol VLAN ID (PPVID) : disabled | | VLAN Name : enabled | | Protocol Identity : disabled | | | | IEEE 802.3 TLVs | | MAC/PHY Configuration/Status : enabled | | Power via MDI : enabled | | Link Aggregation : disabled | | Maximum Frame Size (MTU) : enabled | | | | LLDP-MED TLVs | | LLDP-MED Capabilities : enabled | | Network Policy : enabled | | Location Identification : enabled | | Extended Power-via-MDI (PSE) : disabled | | Extended Power-via-MDI (PD) : disabled | | Inventory : enabled | | | | Standard Parameters | | Chassis ID Source : userlabel-ifname | | Port ID Source : aid-ifname | | | | LLDP-MED Parameters | | Location Source : access-identifier | | Location Type : civic-address | | | | Notifications | | Port Config Notifications : disabled | | LLDP-MED Notifications : disabled | | | | Vlan Assignment Delay | | Delay Untagged Access : disabled | | | |================================================================| ESUx> _

Previous