Enabling or Disabling an Uplink Interface

Note: One uplink interface must always be active to allow management traffic between Panorama PON and the OLT; the uplink interface with which the management VLAN is associated cannot be disabled.

To enable or disable an uplink interface:

1. In the Application View Bar, click LAGs ( ).
2. In the Common Tree, select the OLT.
3. Click the NNI/Uplink Interfaces tab, then right-click the uplink interface to work with. The Uplink Interface Property dialog is displayed.
   
   
    
4. Click the Status tab.
5. Do one of the following:
   • To enable the uplink interface, click the Enable button.
   • To disable the uplink interface, click the Disable button.
     
     The Availability State changes to Abnormal.

     Note: To update information, click Refresh.

6. When finished, click the Close button.

Previous   |   Next