Viewing an Uplink Interface Status

To view the status of an uplink interface:

1. In the Application View Bar, click LAGs ( ).
2. In the Common Tree, select the OLT.
3. Click the NNI/Uplink Interfaces tab, then click on an uplink interface. The Properties dialog displays in the lower portion of the screen.
   
   Figure 1: Uplink Interface Property Dialog - Status Tab
   
   
   
   
   
   Table 1: Uplink Interface Property Dialog - Status Tab
    

   This field -	Displays this information -
   Interface AID	Uplink interface’s AID (NET1-NET12).
   User Label	User-defined labels are entered (if any) for the uplink interface.
   Availability State	Availability status (for example, Normal or Abnormal). If the status is Abnormal, click the ellipsis button to the right to display the Uplink Interface Availability State dialog with a list of the reported state values.
   Operational State	Operational state of the uplink interface (either In Service or Out of Service). An uplink interface is Out of Service if all its uplinks are disabled (refer to Enabling or Disabling ESU Uplinks); it is In Service if one or more of its uplinks are enabled.

    

   ---

   Previous   |   Next