The UNI Ports Menu Bar displays the choice of displaying the Status or Configuration of the attached ONTs. Status is read only with a link to a specific OLT. Configuration displays the parameters of the ONT with an Edit button to edit the configuration parameters. The Configuration button edits the ONT one at a time or with the Bulk Edit by selection from a list of ONTs to edit to the same parameters.

Access to UNI Ports is located on the PON Port and ONT Menu Bar.

Status

 

Each column has filtering () options to narrow down access to a specific status parameter.

Configuration

 

1. Click on the Configuration button to edit the Uni Port parameters. Select a ONT and click on the Edit button.
   
   
    
2. The following ONT UNI parameters are available for editing.

• Admin State - enable/disable
• User Label - Editing available
• LLDP Profile - Dropdown list of available profiles
• NAC Profile - Dropdown list of available profiles
• PAE Profile - Dropdown list of available profiles
• PoE Profile - Dropdown list of available profiles
• Port Profile - Dropdown list of available profiles
• RSTP Profile - Dropdown list of available profiles

3. Select the Save button to update the ONT UNI parameters.

Bulk Edit

1. Click on the Configuration and the Bulk Edit buttons to edit the UNI Port parameters.
   
   
    
2. The upper left check box allows the user to select all or deselect all ONTs. 
3. Check the ONT boxes to edit and update each table column and update the new parameters from the dropdown lists.
4. Select the Save button to save the bulk changes to the ONTs.

---

Previous   |   Next