OLT2 Installation
 |
Note: This product is currently in Limited Availability and specifications will not be finalized until products General Availability. |
This document provides instructions to install the Tellabs® OLT2 Optical Line Terminal (OLT2). This guide describes the 100−220 VAC or DC powering options, and includes suggested mounting instructions, turn up and initialization procedures for the OLT2. The OLT2 is a two port OLT suitable for mounting on a wall or in standard 19-in (48.3cm) size rack.
The Tellabs FlexSym® OLT2 Optical Line Terminal is a multi-purpose Optical Line Terminal (OLT) enabling open, simple, and scalable connectivity for wired and wireless networks over fiber and copper networks. It supports multiple technologies, high bandwidth, and a compact size to enable flexible design options. FlexSym OLT2 has optically connected distributed endpoints that can be GPON or symmetrical 10G XGS-PON. In addition, it offers multiple point to point 10G interfaces.
Intended Audience
This document is intended for technicians responsible for:
- Preparing the installation location
- Unpacking and installing the OLT and any accessories
- Connecting the OLT to power and the PON network
- Connecting services to the OLT
Document Number
ENG-012921
Document Revision History
This section describes changes to this document:
| Revision | Date | Notes |
|---|---|---|
| Revision A | March 2024 | Initial release of the Tellabs® OLT2 |
| Revision B | Aug 2024 | Clairified Max Operating Temperature |
Related Documentation
Refer to the following publications for related information.
| Tellabs Product (System) | Document Name and Number |
| Tellabs 1100 Series | Tellabs 1100 Series Optical LAN Managing the PON User’s Guide |
| Tellabs 1100 Series Optical LAN Craft User Interface Guide | |
| Panorama PON | Panorama PON EMS System Administrator Guide |